Specifications - Panasonic Windea VGDT18143W Simple Manual

Specifications

For indoor use only
VGDT18143W
VGDT18543W
VGDT18643W
VGDT18743W
Item number
VGDT18243W
VGDT18343W
VGDT18723W
VGDT18223W
VGDT18323W
Normal
Power
AC100 V, 50/60 Hz
condition
supply
During
voltage
DC24 V (Standby: 30 mA, During alarm: 300 mA)
blackout
Maximum
during alarm
Standby
Standby (With unit
expansion adapter)
Screen
Calling method
Case material
Ambient operating temperature
Height: Approx. 240 mm, Width: Approx. 150 mm, Depth: Approx. 40 mm
Dimensions
(When the product is installed, approx. 15.5 mm from wall surface)
Mass
For indoor use only
Item number
Power supply
Power consumption Maximum during operation: 4.5 W, Standby: 2 W
Screen
Calling method
Case material
Ambient operating temperature
Height: Approx. 240 mm, Width: Approx. 150 mm, Depth: Approx. 40 mm
Dimensions
(When the product is installed, approx. 15.5 mm from wall surface)
Mass
For indoor use only
Item number
Power supply voltage
Supplied from the base unit (DC12 V, 0.15 A or less)
Calling method
Case material
Ambient operating temperature
Height: Approx. 120 mm, Width: Approx. 116 mm, Depth: Approx. 30 mm
Dimensions
(When the product is installed, approx. 10mm from wall surface)
Mass
226 *Door phone is for outdoor use only. Door phone case material: Flame resistance ABS
VGDB18143W
VGDT18145W VGDB18145W
VGDB18543W
VGDT18645W VGDB18645W
VGDB18643W
AC24 V, 50/60 Hz AC100 V, 50/60 Hz AC24 V, 50/60 Hz
11 W
2.5 W
3.5 W
5.0 inch color TFT LCD
Bidirectional simultaneous calling method
Flame resistance ABS
0 °C to + 40 °C
Approx. 1 kg
VGD13111W
AC100 V 50/60 Hz
5.0 inch color TFT LCD
Bidirectional simultaneous calling method
Flame resistance ABS
0 °C to + 40 °C
Approx. 800 g
VGD13113W
Consecutive calling method
Flame resistance ABS
0 °C to + 40 °C
Approx. 200 g
List of Alarms and Calls
Fire detector
"(Siren) The fire detector has been activated.
activated alarm
Please check."
VGDT item number only
"(Siren) Warning, fire, fire. Warning, fire, fire.
Fire confirmation
A fire has broken out. Please evacuate the premises in a safe manner." x 2 times,
alarm
then "(siren)" x 3 times
"(Siren) Fire! Fire!.
Fire alarm
Fire has occurred in the vicinity of this place. Check the safety condition and evacuate."
VGDT item number only
x 2 times, then "(siren)" x 3 times
Fire detector fault alarm "(Beeps)"
Gas leak alarm
"(Rapid beeps) Gas leak."
Gas detector fault alarm "(Beeps)"
Imperfect combustion (CO) alarm "(Beeps) Dangerous! The air is contaminated. Please open a window and ventilate the room."
Call "(Beeps)"
Emergency call alarm
"(Siren) Please come immediately."
General use alarm "(Siren)"
Water leak alarm "(Beeps) Water leak."
Over-currency alarm "(Beeps) Too much electricity is being used."
Emergency alarm "(Siren) Emergency."
Security alarm
"(Siren) Security alarm has activated."
Security preliminary alarm "(Beep) Security is operating." or "(Beep)"
Security lock-up "(Long beep) Check that all windows and doors are locked." or "(Short beeps)"
Earthquake Early Warning System
(Intensity 3 to less than intensity
"(Siren) Warning! An earthquake is about to come."
5-lower)
Simplified earthquake
intensity display
Earthquake Early Warning System
(Intensity 5-lower or above)
"(Siren) Warning! A strong earthquake is about to come."
Simplified earthquake
intensity display
Earthquake Early Warning System
(Intensity 3 to less than intensity "(Siren) Earthquake coming. Intensity △"
5-lower)
"(Siren) In □ seconds, earthquake coming. Intensity △, (siren)"
Detailed earthquake
intensity display
"(Siren) In 10 seconds, earthquake coming. Intensity △"
Earthquake Early Warning System "(Siren) Earthquake very soon. Intensity △, (siren)"
(Intensity 5-lower or above)
"We have an earthquake. Please use caution." x 2 times
Detailed earthquake
intensity display
"(Siren)"
Earthquake Early Warning System
(by the S-wave sensor)
"Warning! We have an earthquake. Please use caution." x 2 times
Continued to next page
(△: Intensity value, □: Every 10 seconds)
227