Panasonic 1M Operation Manuals
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Intercom System
  5. 1M
  6. Operation manuals
Panasonic 1M Operation Manuals

Panasonic 1M Operation Manuals

For apartment building ha d series windea
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
For Apartment Building HA D Series
非常
EMERG.
復旧/警報音停止
RESET/STOP ALARM
火災
確認
FIRE CONFIRM
メニュー
MENU
終了
OFF
電源
POWER
解錠
UNLOCK
通話
TALK
The images are for products with
VGDT serial numbers.
Warranty
Enclosed Separately
Installation Manual
Enclosed Separately
Operation Manual
Security Intercom Model 1M
Type
For Apartment Buildings -
Base Unit (In-wall type)
For Unit -
Base Unit (In-wall type)
Thank you very much for your purchase of a Panasonic
product.
●Read the operation manual carefully for correct and
safe use.
Be sure to read "Safety Precautions" (page 6)
before use.
●Check "Date of Purchase and Store Name" written in
the warranty, and store in a safe place together with
the operation manual.
Product Number
VGDT18112W
VGDT18512W
VGDB18112W
VGDB18512W

Advertisement

Table of Contents
loading

Related Manuals for Panasonic 1M

Summary of Contents for Panasonic 1M

  • Page 1 The images are for products with VGDT serial numbers. Warranty Enclosed Separately Installation Manual Thank you very much for your purchase of a Panasonic Enclosed Separately product. ●Read the operation manual carefully for correct and safe use. Be sure to read "Safety Precautions" (page 6) before use.

  • Page 2: Talk Time

    Skip to the Content You Want to Know * Since the settings of base unit differ for each apartment building, consult with the administrating company or the company that installed the system regarding the settings. How to extend Extension Function Page talk time? How to adjust...
  • Page 3 How to set Changing Page Absence/Sleeping/Home? Living Mode How to end Excuse Function Page a conversation early? If the caller talks too fast Yuttari Talk Page to understand? If buttons displayed Displaying Buttons Page on the screen disappear? *Equipment installed or functions vary depending on the apartment building. "Security functions"...

  • Page 4: Table Of Contents

    Contents INTRODUCTION Safety Precautions - Warnings Cautions 7-11 Notes to All Residents Part Names and Functions 14-15 Top Menu Changing Living Mode 17-20 USUAL USAGE Receiving a Call 21-32 Unlocking the Main Entrance 22-23 Images of the Lobby Phone Video and Sound Recordings when Voicemail Is On (Voicemail Auto Video and Sound Recording) 25-26 Video and Sound Recording while Home (Auto Video Recording while Home/Manual Video and Sound Recording while Home) 27-28...
  • Page 5 OPERATIONS AND MEASURES WHEN AN ALARM GOES OFF About extensions within Unit (Example) 74-75 In the Event of Fire and Disconnection 76-78 In the Event of Gas Leak and Disconnection 78-79 When Making a Call When Making an Emergency Call Alarm When the Security Alarm Is Activated 82-84 Activating the Emergency Alarm...

  • Page 6: Safety Precautions - Warnings

    Safety Precautions - Warnings Always Observe Always observe the following precautions in order to prevent harm to people and damage to property. ■Precautionary information is classified and described according to the level of hazard and damage that may occur as the result of incorrect operation. DANGER Risk of serious injury or death.

  • Page 7: Cautions

    If the earthquake early warning could not be delivered because of other alarms, such as fire or gas leaks. Other conditions and circumstances for which Panasonic is not responsible. Cautions on Talking ●Do not turn off the dedicated breaker for the power (AC100V). Some alarms and talking will be disabled.
  • Page 8 Cautions on Images ●Direct sunlight or intensive lighting on the door phone with camera causes white White vertical lines on the screen of the base unit, making images whitish (the figure on line the right), or causes reflections of the sunlight, but it is not a failure. In addition, if 非常...
  • Page 9 Cautions Setting Date and Time ●Date and time are set on the Lobby Phone or the base unit in the Manager Room. (Individual settings of date and time on the base unit are not available.) Date and time may be deleted in a power outage. Date and time must be set again on the Lobby Phone and base unit in the Manager Room.
  • Page 10 Precautions for the Use of microSD Memory Card ●1GB to 2GB microSD memory cards and 4GB to 32GB microSDHC memory cards can be used. Panasonic memory cards are recommended. ●With some types of microSD memory card, video and sound recording or playback takes longer but this is not a failure.
  • Page 11 Cautions ●Follow the steps on page 69 to 70 to initialize a microSD memory card. Initializing on other devices such as a PC, may reduce the space for video or sound recordings, or may hamper proper operation. ●Initialization of a microSD memory card will delete all the data it has recorded. Save the data you need in your PC or another device.

  • Page 12: Notes To All Residents

    Notes to All Residents ●Automatic fire alarm facilities for fire-fighting are installed inside your unit such as the receivers (security intercom) for apartment building or for unit and detectors. Sprinkler heads are also installed in some buildings. The automatic fire alarm is the facility to detect fire automatically and facilitate smooth evacuation while the sprinkler is to detect and extinguish fire.
  • Page 13 MEMO...

  • Page 14: Part Names And Functions

    (VGDB18512W) Security Intercom For Apartment Buildings Security Intercom When the Unit Entrance 1M Model Base Unit (with video and sound recording 1M Model Base Unit (with video and sound recording function, browser function) (VGDB18112W) function, browser function) (VGDT18112W) 警報音停止...
  • Page 15 Inserting and Ejecting a microSD Memory Card Note ●Insert a microSD memory card during standby status (when nothing is displayed on the screen). ●Follow the eject operation described on page 69 when ejecting the microSD memory card. Remove the setting cover Confirm the orientation of Ejecting the microSD M en u...

  • Page 16: Top Menu

    Top Menu The Top Menu is the gate for operations other than calling, such as mode change ( page 18), setting change ( page 19), and playback of images and voices. Touch (lightly with a finger) each button shown in the Top Menu to move to the respective next screen. Button display area 1 Language display area Lights pictographs to...

  • Page 17: Changing Living Mode

    Changing Living Mode Note Some functions may not be available due to the equipment being used. Selecting the current Living Mode (Absence/Sleeping/Home) will set the base unit status appropriately according to the mode all at once. Change the Living Mode according to the scenes. ■Touch in the Top Menu to display the screen below.

  • Page 18: Menu Button

    Changing Living Mode 非常 EMERG. 復旧/警報音停止 RESET/STOP ALARM Press (MENU button) メニュー 火災 確認 FIRE CONFIRM The Top Menu will appear. メニュー MENU 終了 電源 POWER Press 解錠 UNLOCK 通話 TALK Touch in the Top Touch Menu The mode change screen will appear. mode change screen Touch the Living Mode you want to change...
  • Page 19 Changing Living Mode Changing Each Setting of Living Mode 非常 EMERG. 復旧/警報音停止 RESET/STOP ALARM Press (MENU button) メニュー 火災 確認 FIRE CONFIRM The Top Menu will appear. メニュー MENU 終了 電源 POWER Press 解錠 UNLOCK Touch in the Top 通話 TALK Touch Menu...

  • Page 20: Changing Living Mode

    Changing Living Mode Security When Security mode is set. Select either "On/Off", and touch Turns security ON. Turns security OFF. Note The current settings will not change, even if changing the settings. Touch To update the Living Mode settings to the current settings, set the Living Mode again.

  • Page 21: Receiving A Call

    Receiving a Call When there is a call from the Main Entrance, the Unit Entrance, the Manager Room, or Other Unit, you can talk with the caller. When there is a call, the call sound sounds and the caller display (○○ is calling) flashes on the screen.

  • Page 22: Images Of The Lobby Phone

    Images of the Lobby Phone The sub-screen position can be changed with the setting of the Lobby Phone. Installer Setting (Consult with the company that installed the system or the administrating company.) Receiving a Call Talking Sub-screen Sub-screen Main screen Main screen ●Main screen: Displays the current image.
  • Page 23 Receiving a Call Switching the main screen and the sub-screen Touch the sub-screen. Display of the main screen and that of the sub-screen will switch. Note You can also change the display by touching Receiving a Call Talking ● Touching the sub-screen again will close the sub-screen Touch the sub-screen again and show the full-screen.

  • Page 24: Video And Sound Recordings When Voicemail Is On (Voicemail Auto Video And Sound Recording)

    Video and Sound Recordings when Voicemail Is On (Voicemail Auto Video and Sound Recording) ● Voicemail is turned On when Living Mode is set to "Absence" (if every mode is set to the factory setting), and images of visitors or messages from the Manager Room while you are away can be recorded and played later.

  • Page 25: Video And Sound Recording While Home (Auto Video Recording While Home/Manual Video And Sound Recording While Home)

    Receiving a Call Video and Sound Recording while Home (Auto Video Recording while Home/Manual Video and Sound Recording while Home) ●Voicemail is turned Off when the Living Mode is set to "Home" or "Sleeping" (if every mode is set to the factory setting), however, when there is a call from the Lobby Phone or the cordless handset of the door phone with camera, video recording starts automatically.
  • Page 26 ● The number of items shown is a rough estimate. Since data size changes according to the content of video or sound recording, the numbers are not guaranteed values. ● It is recommended to use which 512MB to 2GB microSD memory card of Panasonic Corporation, or 4GB to 32GB microSDHC memory card.

  • Page 27: Adjusting Images

    Receiving a Call Adjusting images ● When called from the Door Phone, the Manager Room, or another unit, no image will appear. Note (The screen turns blue.) ●The image cannot be adjusted. Touch during the conversation until appears on the screen is not displayed if the settings for for Installer Setting...
  • Page 28 Zooming (enlarging) images Touch while the image is displayed (Wide image) * You can also zoom by touching the position on which you wish to zoom in. ● Images are displayed as a wide image. (Initial status) Zoom ● Images are enlarged (digital double zoom). changes to ●Touch and the image will return to the...

  • Page 29: Auto Zoom Function

    Receiving a Call Auto Zoom Function ● When talking on the Lobby Phone, in addition to the usual Zoom function, it is also possible to have the system perform person recognition, automatically zoom in on the vicinity of the face, and track the image range in response to the movement.

  • Page 30: Convenient Functions (Yuttari, Excuse Function, Cont Function, Pretend To Be Out Function)

    Convenient Functions Convenient Yuttari Talk You can use this function when you want to listen to the other party at a slow pace during conversation. Original speed Hello I have brought you a parcel 非常 EMERG. 復旧/警報 音停止 ALARM RESET/STOP 火災...
  • Page 31 Receiving a Call Convenient Functions Convenient Excuse Function You find this function convenient when you are eager to end the conversation. It plays the call sound or a baby’s cry during conversation to give you an excuse to end the conversation. You can set the sound from among the three types with "Excuse Sound"...

  • Page 32: Displaying Images From The Separately Installed Camera (Switch Button)

    Receiving a Call Convenient Functions Convenient Pretending to Be Out Function When you do not want to answer a call, you can play an absence message with the Pretending to be out setting. You can change the content of the absence message or record it with the “Pretending to be out setting”...

  • Page 33: Being Called While Talking

    Being called while talking Being called from the Main Entrance Being called from the Unit Entrance while talking with the Unit Entrance while talking with the Main Entrance ●It is the same as when called from another unit. The Manager Room cannot call you while Note you are talking with the Main Entrance.

  • Page 34: Calling The Unit Entrance

    Calling the Unit Entrance ● When you want to look around the Unit Entrance, refer to page 43. Note ● In an apartment building that does not support the Manager Call function (calling the Manager Room from the unit) or Call Other Unit function (calling another unit from the unit), "Manager Room 1"...

  • Page 35: Calling The Manager Room

    Calling the Manager Room In an apartment building that does not support the Manager Call function (calling the Note manager room from the unit), you cannot call the manager room. Press the TALK button in the 非常 EMERG. standby status (nothing is 復旧/警報音停止...

  • Page 36: Calling Other Units

    Calling Other Units In an apartment building that does not support the Call Other Unit function (calling another Note unit from the unit), you cannot call other units. Press the TALK button in the 非常 EMERG. standby status (nothing is 復旧/警報音停止...

  • Page 37: Calling An Elevator

    Calling an Elevator Note In an apartment building where the elevator system is not linked to the Apartment Building HA System, the procedure is not available. If you do not know what equipment is installed, contact the administrating company or Manager Room. Emergency EMERG.

  • Page 38: When A Parcel Is Delivered In The Delivery Box

    When a Parcel Is Delivered in the Delivery Box Note This function is not available in an apartment building where the Delivery Box system is installed but not linked to the Apartment Building HA System. You can cancel the blue flashing (blue light) on the periphery of the MENU button. Installer Setting (Consult with the company that installed the system or the administrating company.)

  • Page 39: When There Is A Message From The Manager Room (Notice)

    When There Is a Message from the Manager Room (Notice) Note This function is not available in an apartment building that does not support the message function. You can cancel the blue flashing (blue light) on the periphery of the MENU button. Installer Setting (Consult with the company that installed the system or the administrating company.)

  • Page 40: Video Or Sound Was Recorded While You Were Away

    Video or Sound Was Recorded while You Were Away You can cancel the blue flashing (blue light) on the periphery of the MENU button. Installer Setting (Consult with the company that installed the system or the administrating company.) Emergency EMERG. 警報音停止...

  • Page 41: Receiving Voice Mail From The Manager Room

    Receiving Voice Mail from the Manager Room You can cancel the blue flashing (blue light) on the periphery of the MENU button. Installer Setting (Consult with the company that installed the system or the administrating company.) The periphery of the MENU button 非常...

  • Page 42: Announcement From The Manager Room

    Announcement from the Manager Room This function plays announcements from the manager room as "General Announcement" or "Emergency Announcement". The base unit shows the 非常 EMERG. indication on the screen, and Announcement for 復旧/警報音停止 plays a gong sound followed residents. RESET/STOP ALARM by an announcement 火災...

  • Page 43: When You Want To Look Around The Unit Entrance

    When You Want to Look around the Unit Entrance ●This function is only available when a cordless handset of the door phone with Note camera is installed at the Unit Entrance. Use this function after confirming if a cordless handset of the door phone with camera is installed in your apartment building and your unit.

  • Page 44: Messages

    Messages You can record/replay messages. Recording Messages Press the TALK button in the standby status (nothing is 通話 TALK displayed on the screen) The Call Screen is displayed. Calling screen Touch on the calling screen Touch Touch Touch Touch Recording of a message starts. A message of about 15 seconds can be recorded.

  • Page 45: Messages

    Playing back Messages When you have messages, the periphery of the MENU button flashes in blue. 非常 EMERG. You can cancel the blue flashing (blue light) Installer 復旧/警報音停止 RESET/STOP ALARM Setting on the periphery of the MENU button. MENU button Consult with the company that installed 火災...

  • Page 46: Setting According To Your Preferences

    Setting according to your preferences You can set the ringtone volume etc. according to your preferences. Setting Description Default Page This sets the volume when a call is made from the Main Ringtone Volume High Entrance, the Unit Entrance or the manager room. General This sets whether to emit a ring for a general announcement.
  • Page 47 Setting Description Default Page Linked with Sets whether to automatically switch Living Mode to Absence Secured Absence Mode when the external security setting is made. This sets a function that notifies the user, with a message or notification sound from the entrance, that Security is on when Security has been External turned On/Off using the External Security Switch/Door Phone.
  • Page 48 Setting Notes Sheet Please use this sheet to note down the settings you have made for future reference. ● (Note down the setting or add ( ) mark.) Ringtone Volume □ Extra-High □ High □ Medium □ Low □ Step □...
  • Page 49 Security 1 □ No □ 60 sec. □ 120 sec. □ 300 sec. Security □ No □ 60 sec. □ 120 sec. □ 300 sec. Security 2 Preliminary Security 3 □ No □ 60 sec. □ 120 sec. □ 300 sec. Alarm Security 4 □...
  • Page 50 Starting User Setting standby state Emergency With nothing displayed on the screen EMERG. (standby state) 復旧/警報音停止 RESET/STOP ALARM MENU Button Press (MENU Button) メニュー 火災 確認 FIRE CONFIRM メニュー MENU 終了 電源 POWER 解錠 Press UNLOCK Talk TALK Top Menu Touch in the Top Menu The Setting Screen is displayed.
  • Page 51 Setting according to your preferences Finishing User Setting 終了 Press (OFF Button) to go to the standby 終了 state (state in which nothing is displayed on the screen). Press Names and Actions of each Button on the User Setting Screen Security Setting Screen Volume Setting Screen Button...

  • Page 52: Volume Setting

    Volume Setting Setting Screen Touch on the Setting Screen The Volume Setting Screen is Touch displayed. For how to start the settings, please see page 50. Volume Setting Screen On the Volume Setting Screen, touch for the setting you wish to set Touch For details on each setting, please see any one...
  • Page 53 Setting according to your preferences General Announcement General Announcement Tone Screen When "Announcement/Mail Setting" is set to Note "Reject" in Installation Setting, "General Announcement" is not displayed. (For further information please contact the store responsible for installation or the service and maintenance company.) Select one of "On/Off"...

  • Page 54: Earthquake Setting

    Earthquake Setting ●In apartment buildings installed with systems that do not support the Earthquake Alarm（Warning), Note "Earthquake Setting" is not displayed on the setting screen. If you do not know which system is installed, please contact store responsible for installation or the service and maintenance company. ●In the case of the Full Intensity Display, Intensity 3 and Intensity 4 can be set as separate settings once the system has started receiving earthquake information.

  • Page 55: Sound Setting

    Setting according to your preferences Sound Setting Setup screen Touch on the Setup Screen The Sound Setting Screen is displayed. For how to start the settings, please see Touch page 50. Sound Setting Screen On the Sound Setting Screen, touch for the content you wish to set For details on each setting, please see below.
  • Page 56 Ringtone Screen Ringtone and Accept/Reject Calls In the case of Other Units The "Other Unit" indicator will not be displayed unless Note the setting has been made on the Controller. Please contact the store responsible for installation or the service and maintenance company. Touch for the Other Unit on the Ringtone Screen...
  • Page 57 Setting according to your preferences Excuse Tone Excuse Tone Screen Select any of "Telephone 1/Telephone 2/Baby" and touch Touch any one Telephone 1 factory Telephone Ringtone default setting Telephone 2 Telephone Ringtone Touch Baby Crying Finish settings 終了 Press (OFF Button) to go to the standby 終了...

  • Page 58: Not-Home Setting

    Not-home Setting Setup screen Touch on the Setting Screen The Away-From-Home Setting screen is displayed. For how to start the settings, please see Touch page 50. Not-home Setting Screen On the Not-home Setting Screen, touch for the content you wish to set Touch For details on each setting, please see below.
  • Page 59 Setting according to your preferences Touch Touch Start recording. The recording time is about 15 seconds. If you finish the recording within this time, please press Touch to confirm that the message has been recorded ●Only 1 message can be recorded. To record a Note new message, the old message should be deleted.

  • Page 60: Yuttari On/Off

    Pretend To Be Out Indicator Select one of "On/Off" and touch Pretend To Be Out Indicator Screen When Not-home is "OFF" in Living factory Mode and a visitor call is made, the default is displayed. setting When Not-home is "OFF" in Living Touch Mode and a visitor call is made, the any one...

  • Page 61: Security Setting

    Setting according to your preferences Security Setting This is for setting up the security function. For the Security Alarm, see also ( pages 97 to 105). Setup screen Touch on the Setting Screen The Security Settings Screen is displayed. For how to start the settings, please see page 50.
  • Page 62 Enter the 4-digit security number using the keypad If you make a mistake as you enter the number, Note touch . This will clear all numbers. Touch Touch Touch The Security Number is now set. any one The display returns to the Setting Screen. Write the entered security number in the Note security number field in page 48.
  • Page 63 Setting according to your preferences Security preliminary alarm ●This can be set if the "Permit changes to delay setting" is set to "Yes" in Installation Setting. Note (Please contact the store responsible for installation or the service and maintenance company) ●If the "Permit changes to delay setting"...

  • Page 64: Return Home Notification Setting

    ID Authentication Key Off In apartment buildings in which the ID Checker has not been set up, "ID Authentication Key Off" Note will not be displayed. If you do not know which system is installed, please contact store responsible for installation or the service and maintenance company.

  • Page 65: Return Home Notification Setting

    Setting according to your preferences Return Home Notification Setting ●Please set the number for the ID Authentication Key of your own apartment block. Note If you do not know the number of the ID Authentication Key, contact the management company or manager room.
  • Page 66 Mute Setting Note ● It is Normal for the Start Time and Finish Time to be the same, and for the Return Home Notification Sound to be emitted. (Factory default setting: 21:00 to 7:00) ● Normally, the Start Time is 00:00, the Finish Time is 24:00, and the Return Home Notification Sound is not played.

  • Page 67: Language

    Setting according to your preferences Language Setup screen Touch on the Setting Screen The Language Screen is displayed. For how to start the settings, please see Touch page 50. Select either of " 日本語/英語 ", Language Screen and touch Touch any one 日本語...

  • Page 68: Private Security Number Setting

    Private Security Number Setting Note ● Be sure take a note of the Security Number in the "Note of Security Number" on page 49 as a reminder in case you forget it. ● The "Private Security Number Setting" indicator will not be displayed unless the setting has been made on the Controller.

  • Page 69: Sd Setting

    Setting according to your preferences SD Setting Note This can be set when an microSD memory card is inserted. Setup screen Touch on the Setting Screen The SD Setting Screen is displayed. For how to start the settings, please see Touch page 50.
  • Page 70 Initialize When Initialize is performed, all visitor records Note and data recorded on the microSD memory card are deleted. Before performing this operation, please save any required data on your PC or other device. Touch Touch either "Yes/No" any one When "Yes"...

  • Page 71: Extension Light Setting

    Setting according to your preferences Extension Light Setting ● This will be displayed when a Door Phone including a camera is connected and the Camera Light Note Setting (Installation Setting) is set to "Light Available". (Consult with the company that installed the system or the administrating company.) ●...

  • Page 72: Initialize

    Initialize Setup screen Touch on the Setting Screen The Initialize Screen is displayed. For how to start the settings, please see page 50. Touch Initialize Screen On the Initialize Screen, touch the content you wish to initialize For details on the content of each setting, please see below.
  • Page 73 Setting according to your preferences Delete Recorded Data When "Yes" is selected Note Visitor records that have been protected will not be deleted. To delete these, please cancel the protection and use Delete Recorded Data again. For how to cancel the protection, see page 111 Touch either "Yes/No"...

  • Page 74: About Extensions Within Unit (Example)

    About extensions within Unit (Example) A device of the type shown below is installed in your apartment block. If an alarm is set off by a fire etc., you will be notified of the emergency situation by sound and light. Note If you do not know which system is installed and which functions are available, please contact store responsible for installation or the service and maintenance company.
  • Page 75 Devices which sound when the Alarm is triggered Alarm indicator lamp When the alarm is triggered, the Position Display Light following devices sound. Door Phone with Base Unit ● Alarm Display Expansion Speakers ● (Sounds simultaneously with Master) Door Phone with Alarm Indicator or ●...

  • Page 76: In The Event Of Fire And Disconnection

    In the Event of Fire and Disconnection Note Use the system after confirming that each device is properly installed. When VGDT Item Numbers Are Used The fire detector activated alarm time can be After about 2 minutes Installer set from 2 to 5 minutes. Setting 2.
  • Page 77 When VGDB item numbers are used When the detector detects fire, the base unit and When fire occurs on the same floor the cordless handset of the door phone or the floor directly below report the fire. If fire occurs on the same floor or the flow Warning, fire, fire.

  • Page 78: In The Event Of Gas Leak And Disconnection

    In the Event of In the Event of Fire and Disconnection Use the system after confirming that Note Use the system after confirming that each Note each device is properly installed. device is properly installed. If the heat detector is disconnected In the Event of Gas Leak If the heat detector is disconnected from the When the gas detector detects gas leak, the...
  • Page 79 Gas Leak and Disconnection In the Event of Imperfect Combustion In the Event of Gas Detector Fault When the detector is disconnected or removed, This function is available only if a gas detector Note the base unit and the cordless handset of the with the CO alarm function is installed.

  • Page 80: When Making A Call

    When Making a Call Note Use the system after confirming that each device is properly installed. When the Call Button Is Pressed When the Call button is pressed, the base unit notifies Call button the call. The Call 1 indication will turn off after approximately 1 minute and the periphery of the MENU button will flash in red.

  • Page 81: When Making An Emergency Call Alarm

    When Making an Emergency Call Alarm Note Use the system after confirming that each device is properly installed. Set Call to the emergency call alarm. It can also be set to the Installer Setting toilet/bathroom announcement. (Consult with the company that installed the system or the administrating company.) When the Call Button Is Pressed When the Call button is pressed, the base unit and Call button...

  • Page 82: When The Security Alarm Is Activated

    When the Security Alarm Is Activated Note Use the system after confirming that each device is properly installed. If a Window Is Opened While the Security Alarm is Active If a window is opened while the security alarm is active, the magnet switch is turned on and security indication is displayed on the base unit.
  • Page 83 If a Door Is Opened While the Security Alarm Is Active If a door is opened while the security alarm is active, the magnet switch is turned on and the security indication (security preliminary alarm) is displayed on the base unit. The Security Indicator flashes in green while the security alarm is active.
  • Page 84 When the Security Alarm Is Activated Note Use the system after confirming that each device is properly installed. Disarming the security alarm (when the security alarm/security preliminary alarm is active: disarm the alarm) Touch on the base unit while the security preliminary alarm or security alarm is active 火災...

  • Page 85: Activating The Emergency Alarm

    Activating the Emergency Alarm Note Use the system after confirming that each device is properly installed. 非常 If the Emergency button or an expanded Emergency button is pressed EMERG. When the Emergency button or an expanded Emergency button is pressed, the base unit and the cordless handset of the door phone report the state of emergency.

  • Page 86: In The Event Of Water Leak

    In the Event of Water Leak Note Use the system after confirming that each device is properly installed. The water leak indicator flashes "Be-Be-Beep", in red Water Leak. Alarm Stop button 非常 EMERG. 復旧/警報音停止 The alarm message "(beep sound) RESET/STOP ALARM Water Leak."...

  • Page 87: If Wireless Equipment Failure Occurs

    If Wireless Equipment Failure Occurs Note Use the system after confirming that each device is properly installed. The wireless equipment failure Alarm Stop button 非常 indicator is displayed in red on EMERG. the screen 復旧/警報音停止 RESET/STOP ALARM The wireless equipment failure 火災...

  • Page 88: When Using Too Much Electricity

    When Using Too Much Electricity ●Nothing is displayed if you are using a distribution board without over Note current alarm device. ●Use the system after confirming that each device is properly installed. The message lights in red and the "Be-Be-Beep", Too much electricity power usage indicator flashes is being used.

  • Page 89: When General Use Alarm Sounds

    LCD Display and Call Messages The distribution panel features the "limiter ON/OFF" setting, the "five-stage display type" for data Note type, and "no level display type" as the photocoupler output type. The electricity measured by the distribution panel depends on these settings and types. Check your distribution panel and the operation manual provided with it.

  • Page 90: In The Event Of An Earthquake

    In the Event of an Earthquake You cannot use this system in an apartment building with no emergency earthquake alert (prediction) system is installed. Note ● If the earthquake sensor of the elevator is not linked with the emergency earth quake alert (prediction) system, the elevator stop indicator and the message do not appear.
  • Page 91 For information about whether your apartment building uses the detailed earthquake intensity Installer Setting indicator or the simplified earthquake intensity indicator ( page 92), ask your administrating company. If an Emergency Earthquake When the emergency earthquake alert Alert (Prediction) Was an Error (prediction) is tested from the manager room It is notified by sound and screen display.

  • Page 92: In The Event Of An Earthquake

    In the Event of an Earthquake You cannot use this system in an apartment building with no emergency earthquake alert (prediction) system ● Note is installed. Use the system after confirming that each device is properly installed. ● When Simplified Earthquake Intensity Display Is Used For information about whether your apartment building uses the detailed earthquake Installer intensity indicator (...

  • Page 93: If An Elevator Stops

    If an Elevator Stops This feature can only be used in an apartment building in which the emergency earthquake alert interface Note ● board is installed and linked with the elevator system. Use the system after confirming that each device is properly installed. ●...

  • Page 94: If An Alarm Occurs During Another Alarm

    If an Alarm Occurs During Another Alarm Priority assigned to each alarm is used when multiple alarms occur at the same time. The priority order of each alarm is as shown below. Operations performed when multiple alarms occur at the same time are shown in page 95. List of descriptions of alarms and calls Alarm/call details for Alarm/call details for...
  • Page 95 How the screen is displayed when an alarm occurs during another alarm If an alert is generated during another alert, the sub-screen showing the one with higher priority appears. The message for the alarm with higher priority is played. Example) If a gas leak alarm (higher priority) occurs during an emergency alarm (low priority) Emergency alarm message Switches to the gas leak alarm.

  • Page 96: If You Receive An Incoming Call During An Alarm

    If You Receive an Incoming Call During an Alarm If you are called from the Main Entrance or the manager room, the caller indicator flashes, the sub-screen appears, the alarm message and alarm sound are alternately played. ●It is not possible to call the unit from the Unit Entrance while an alarm is sounding. Note (You can stop the alarm sound by pressing the Alarm Stop button.) ●Calls do not ring in the Main Entrance and the manager room while an emergency earthquake alert...

  • Page 97: Security Alarm

    Security Alarm Note Use the system after confirming that each device is properly installed. If the security alarm is enabled after locking up the door and windows, the base unit reports when they are opened by an intruder by generating an alarm. When a certain period of time has elapsed, it also notifies the handset of the door phone and the manager room of the alarm.

  • Page 98: Set A Security Number To Disarm The Security Alarm

    Set a Security Number to Disarm the Security Alarm ●If a security number is set, the alarm cannot be disarmed without entering the security Note number. We recommend to set a security number when using this product. ●Make sure to write down the set security number on the "Security number" field in page 48, so that you can check the number when you forget it.
  • Page 99 Security Alarm Touch after entering the security number Note ●The security number is confirmed and the security setting screen appears. ●Write the entered security number in the security number field in page 48. Touch Security setting screen Press the OFF button 終了...

  • Page 100: Activating The Security Alarm

    Activating the Security Alarm Activate the security alarm for both front door and windows at the same time. Setting the Security Alarm When Going Out Close and lock the front door and windows Standby status 非常 EMERG. to which the magnet switches are installed 復旧/警報音停止...

  • Page 101: Setting The Security Alarm When Sleeping At Home

    Shortening the Alarm Delay Time Using the Handset of the Door Phone By performing the following operation on the handset of the door phone, you can immediately set the security alarm for the front door and windows before the alarm delay time has elapsed. Set the security alarm on the base unit and go out from the Unit Entrance Cordless handset of Go out from the Unit Entrance within the alarm delay time.

  • Page 102: Disarming The Security Alarm

    Disarming the Security Alarm Disarm the security alarm for both front door and windows at the same time. Disarming the Alarm when returning home If the front door is opened in the security alarm status, the magnet switch is turned on and the security alarm message "(beep) Security is operating."...

  • Page 103: Disarming The Alarm When Waking Up

    Disarming the Alarm When Waking Up Standby status Press MENU button while the security alarm is active 火災 MENU 確認 FIRE CONFIRM button メニュー MENU Touch to change living mode 終了 Example) Sleeping Mode, Home Mode, etc. 電源 電源 ガス 留守...

  • Page 104: How To Set The Security Alarm Using The External Security Setting Switch (External Security Alarm/External Setting)

    How to Set the Security Alarm Using the External Security Setting Switch (external security alarm/external setting) Turning the external security setting switch will set the security alarm settings for the front door and windows at the same time. The method to activate/deactivate the security alarm depends on the equipment installed in your apartment Note building and the equipment settings.

  • Page 105: How To Disarm The Security Alarm Using The External Security Setting Switch (External Security Alarm/External Disarming)

    How to Disarm the Security Alarm Using the External Security Setting Switch (external security alarm/external disarming) Turning the external security setting switch will disarm the security alarm for the front door and windows at the same time. * The factory default setting does not allow the external security setting switch to disarm the alarm. Disarm the security alarm using the base unit.

  • Page 106: Record Management

    Record Management Introduction (list of record management items) ●Visitor Record, Manager Room, Voice Mail, Emergency Announcement, and General Announcement are provided as record management items. For details about each item, refer to the following table. I t e m Description Page Use this feature to play back recorded audio/video data of the Main Entrance, the Unit Entrance, and the manger...

  • Page 107: How To Start Operation Of Each Item Of Records Management

    How to Start Operation of Each Item of Records Management Press the MENU button in the メニュー standby status (nothing is MENU displayed on the screen) Top Menu screen Touch The Record Management screen appears. Touch Choose the item you want to operate Record Management screen Select one of Touch any...

  • Page 108: Play Back Recorded Data Of Visitor Record, Manager Room And Voice Mail

    Play Back Recorded Data of Visitor Record, Manager Room and Voice Mail Note ● The sub-screen is also recorded. Image information display ● No screen switch operation can be performed Unread: Unread recording screen while playing back a recorded video. Protected: Protected recording screen With voice:...
  • Page 109 Record Management Select one from Record Management screen on the Record Management screen by touching it Note Items without recorded data do not appear. Touch any one Display a list you want to play Touch and touch date/time The image of the selected data/time is shown on the preview screen.

  • Page 110: How To Protect/Delete Recorded Audio/Video

    How to protect/delete recorded audio/video ● If the number of recorded items reaches the maximum when Living Mode is Home or Sleeping, data will be overwritten because the absence recording setting is OFF. And when Living Mode is Absence, the absence recording setting is set to ON but no video can be recorded. (factory default setting) Protect necessary data and delete unnecessary data.

  • Page 111: Canceling Protection

    Record Management Canceling Protection Record Management screen Select one from Touch on the any one Record Management screen by touching it Note Items without recorded data do not appear. List display screen Touch Touch Touch ●The message "Do you want to cancel the protection of the selected data?"...

  • Page 112: Playing Back Emergency Announcement

    Playing Back Emergency Announcement Record Management screen Select the on the Record Management screen Note This operation cannot be performed if there is no recorded data. Touch The recorded emergency announcement is played The voice is played from the base unit. Note Only one item can be recorded.

  • Page 113: Lobby Phone

    Lobby Phone Part Names and Functions A lobby phone with a built-in camera is used in figures in this operation manual. *The following products differ only in the size of the panel. ■Lobby phone with a built-in camera ■Lobby phone with a small built-in camera ■Lobby phone with a large built-in camera XVGD5111SK, XVGD5111QK, (XVGD5121SK, XVGD5121QK)
  • Page 114 Talk Function Calling a Dwelling Unit Enter the unit number using the numeric keypad Lobby phone with a built-in camera Example 1) When calling Unit 101. Enter the unit number... Example 2) When there are building numbers (calling 電源 Unit 101 of Building 2) Enter the building number...
  • Page 115 Lobby Phone Main Entrance Unlock Function Unlocking with the Security Number * The security number must be set. (Ask the administrating company or the manager room.) Press the button Lobby phone with a built-in camera 電源 Enter the 4-digit security number using the numeric pad * If entered the wrong security number, press the button (clear button) and start over the...
  • Page 116 Unlocking with the Emergency Unlock Button ●You can press the emergency unlock button installed near the Main Entrance (E.lock) to unlock the Main Entrance (E.lock). Emergency Push the 電源 unlocking display Press the emergency unlock button emergency unlock button installed near the lobby phone The main entrance is unlocked.
  • Page 117 Lobby Phone Unlocking with the Double Auto-lock System The main entrance of the second gate can be unlocked without operation from the visiting unit. Note This operation cannot be performed for apartment buildings without double auto-lock function. If you do not know what equipment is installed, contact the administrating company or manager room. Call the visiting unit with Call again using the second gate Lobby Phone within the timer period...
  • Page 118 Unlocking with the Panic Open Feature ●If abnormality such as alarm occurs in an apartment building, unlock the main entrance Example: Unit number: 101 (E.lock) according to the occurred abnormality. If the set time period is exceeded, the main Detector entrance will be locked.
  • Page 119 Lobby Phone Unit information confirmation method ●On returning home or going out, you can perform an operation to check the unit information (deliveries, messages from the manager room, alarm information etc.). ●The following methods are provided as confirmation methods Simplified confirmation Confirmation through ID authentication (On going out) Check using ID authentication (on returning home) Check using Private Security Number authentication...
  • Page 120 Confirmation method : Confirmation through ID authentication (On going out) ●On going out, the following items can be checked with the lobby phone using ID authentication. Security status of the unit ● Lock status of the unit ● ● If the ID collating unit does not support linking to the HA system of the apartment building, this Note function cannot be used.
  • Page 121 Lobby Phone Confirmation method : Check using ID authentication (on returning home) ●On returning home, the following actions can be performed in conjunction with unlocking the Main Entrance (E.lock) using the ID collating unit. Whether there is any delivery Disarming of unit security alarm Alarm occurrence status ●...
  • Page 122 Confirmation method : Check using Private Security Number authentication * The private security number must be set. (Ask the administrating company or the manager room.) ●The following actions can be performed in conjunction with unlocking the main entrance (E.lock) using the private security number. Whether there is any delivery ●...
  • Page 123 Lobby Phone Elevator Link Function Even when an elevator is operated in security mode, you can also operate the elevator by temporarily cancel the security operation rule through unlocking the main entrance and ID authentication operation by a resident. In an apartment building where the elevator system is not linked to the Apartment Building HA System, Note the procedure is If you do not know what equipment is installed, contact the administrating company or manager room.

  • Page 124: Expire Date Of The Gas Detector

    Expire Date of the Gas Detector ●To maintain functionality, the expiration date is set to the gas detector that is connected to the base unit. ●Make sure to replace it with a new gas detector before reaching the expiration date. Make sure to confirm the operation after the replacement.

  • Page 125: Troubleshooting

    Troubleshooting If the alarm of the base unit does not stop, use the stop alarm button to stop the alarm. If still the alarm Note keep sounding, take the following measures. The VGDT item number (embedded type) is used in the figure. As the first step to cope with the base unit abnormality, for example, when you cannot 非常...
  • Page 126 Perform the following inspection and measures before asking for fixing and services. Status Inspection Do not function at all The breaker has not tripped? "(siren sound) The fire detector has been activated. A gas/kerosene stove is not used under the detector? Please check."...
  • Page 127 Troubleshooting Measures Turn on the breaker. Change the location of the stove. Open the windows and door to ventilate the room. Wipe the detergent with a soft cloth. If it keeps sounding, contact the company installed the system or the administrating company. Open the windows and door to ventilate the room.

  • Page 128: Specifications

    Specifications Only for indoor use Item number VGDT18112W • VGDT18512W VGDB18112W • VGDB18512W Normal AC 100V 50/60Hz Power conditions During voltage DC24V (Standby: 30mA, During Alarm: 300mA) blackout Power consumption Max. during alarm: 18W / Max. during lobby calls: 12W / Standby: 4.5W Screen 5.0-inch color TFT LCD Calling method...
  • Page 129 Security preliminary alarm "(beep) Security is operating." Security lock-up "(beep) Check that all windows and doors are locked." Emergency earthquake alert (Intensity 3 – Intensity 5-lower) "(beep sound) Warning! An earthquake is about to come." Simplified earthquake intensity display Emergency earthquake alert (Intensity 5-lower or above) "(beep) Warning! A strong earthquake is about to come."...

  • Page 130: Faq

    * For questions about the setting of the base unit, ask the company installed the system or the administrating company because the setting depends on each apartment building. Can I extend the length of calls from the lobby phone? No. You cannot extend it. I want to reset the date.

  • Page 131: Warranty And Post-Sale Services

    Travel expense: Cost to dispatch engineers. ●Repair parts are maintained for 7 years after the product is discontinued We will retain parts to maintain the functionality of this product (1M-type based unit for secured intercom) for 7 years after it is discontinued.
  • Page 132 0120-283338 0120-551626 Phone: 8A3 E77 00003 M0212-20512AB...
  • Page 133 Page XX, means please refer to page XX of the operation manual.) (Example: The notation Sim p le Guid e ◎ Information on the Apartment Building HA System is available. (As of January, 2012) http://www2.panasonic.biz/es/densetsu/ha/mansion_ha/index.html Product Number VGDT18112W VGDT18512W VGDB18112W VGDB18512W •...
  • Page 134 Screen Display Screen Display Meaning Measures When the Menu Lamp is Flashing A parcel has been delivered to the Take the parcel out of the delivery box. delivery box. • Emergency Button Page 38 If you press the MENU Button when 非常...

This manual is also suitable for:

Vgdb18112wVgdt18112wVgdt18512wVgdb18512w

Table of Contents