Wet/Dry Vac Assembly - RIDGID WD1855AU0 Owner's Manual

Drum/Caddy Assembly (continued)
Installing Storage Bag
Install the storage bag by attaching the
storage bag straps onto the handle and
connecting each snap securely.

Wet/Dry Vac Assembly

1. Position the powerhead assembly on
the drum/caddy assembly as shown
(assembled earlier).
2. Rotate both latches down and press
until you hear them snap over the
flanges on the drum.
Insert Hose
Insert the push button end of the
"Dual- Flex™ Locking" hose into the
inlet of the Vac. The hose should snap
into place. To remove the hose from the
Vac, press the release button in the hose
assembly and pull the hose out of the
Vac inlet, as shown.
Snaps
Drum
Latch
Powerhead
Assembly
Latch
Drum
Press Release
and Button
Pull
8 8 8
Storage
Bag Straps
Handle
Drum
Latch
Drum
Flange