RIDGID WD1855AU0 Owner's Manual page 15

Maintenance (continued)
Cord Maintenance
When vacuuming is complete, unplug the
cord and wrap it around the cord wrap
on the powerhead assembly handle. If
the power cord is damaged, it must be
replaced by the manufacturer or service
agent or by similarly qualified personnel to
reduce the risk of accident.
Powerhead
Assembly
Handle
Power
Cord
Storage
Before storing your Vac, the drum should
be emptied and cleaned. The cord should
be wrapped around the unit and the hose
should be stored as described in this
manual. Accessories should be kept in
the same area as the Vac so they can
be readily available. The Vac should be
stored indoors.
Casters and Wheels
Should your cart squeak or become hard
to roll, you should place two or three
drops of general purpose oil on each
wheel at the axle. If your casters are
noisy, you may put a drop of oil on the
roller shaft to make them quieter.
Frame and Handles
Your metal handle is painted to prevent
rust, however, liquids and corrosive
debris should be wiped off with a soft
cloth should they come in contact with the
handle.
Cord
WARNING: To assure product
Wrap
SAFETY and RELIABILITY, any
other maintenance, repairs and
adjustments should be performed by
Authorised Service Centres, always
using RIDGID replacement parts.
15 15