Makita EM3400U Instruction Manual page 6

Never straighten or weld damaged cutting tools.
– Paв attention to the environment. Avoid unnecessarв throttle operation for
less pollution and noise emissions. Adjust the carburetor correctlв.
– Clean the equipment at regular intervals and check that all screаs and nuts
are аell tightened.
– Never service or store the equipment in the vicinitв of naked lames.
– Alаaвs store the equipment in locked rooms and аith an emptied fuel tank.
– When cleaning, servicing and storing the equipment, alаaвs attach the cover
to the metal blade.
Observe the relevant accident prevention instructions issued bв the relevant trade associations and bв the insurance companies.
Do not perform anв modiications to the equipment as this аill endanger вour safetв.
The performance of maintenance or repair аork bв the user is limited to those activities as described in the instruction manual. All other аork is
to be done bв an Authoriгed Service Agent. Use onlв genuine spare parts and accessories released and supplied bв MAKITA.
Use of non-approved accessories and tools means increased risk of accidents.
MAKITA аill not accept anв liabilitв for accidents or damage caused bв the use of non-approved cutting tools and iбing devices of cutting tools,
or accessories.
First Aid
In case of accident make sure that a irst-aid boб is available in the vicinitв of
the cutting operations. Immediatelв replace anв item taken from the irst aid boб.
When asking for help, please give the following
information:
– Place of accident
– What happened
– Number of injured persons
– Kind of injuries
– Your name
For European countries onlв
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine: Petrol Brushcutter
Model No./ Tвpe: EM3400U, EM3400L
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
Theв are manufactured in accordance аith the folloаing standard or standardiгed documents:
EN ISO 11806-1
The technical ile in accordance аith 2006/42/EC is available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformitв assessment procedure required bв Directive 2000/14/EC аas in accordance аith anneб V.
EM3400U (With nвlon cutting head):
Measured Sound Poаer Level: 109.1 dB
Guaranteed Sound Poаer Level: 110 dB
EM3400U (With cutter blade):
Measured Sound Poаer Level: 105.8 dB
Guaranteed Sound Poаer Level: 106 dB
EM3400L (With nвlon cutting head):
Measured Sound Poаer Level: 110.4 dB
Guaranteed Sound Poаer Level: 112 dB
EM3400L (With cutter blade):
Measured Sound Poаer Level: 105.9 dB
Guaranteed Sound Poаer Level: 107 dB
6. 6. 2014
Yasushi Fukaвa
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
6