5
Align the screw holes on the wireless-card shield with the screw holes on the system board and place the wireless-card shield on the
system board.
6
Replace the two screws (M2x2.5) that secure the wireless-card shield to the system board.
7
Route the antenna cables through the routing guides on the wireless-card shield.
Identifier
Status
Post-requisites
1
Replace the
system-board
2
Replace the
back
cover.
3
Replace the stand.
72
Replacing the wireless card
GUID-01B50DEF-DC7D-4F62-9B4E-46505C718967
Released
shield.