Removing The Antennas; Prerequisites; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board
4 Remove the wireless card.
5 Remove the base panel.
6 Remove the rear-I/O bracket.
7 Remove the speakers.
Identifier
Status

Procedure

NOTE: Note the routing of the antenna cables, before removing the antenna cables form the routing guides. Also, note the
location of the antenna modules printed on the display-assembly base as ANT-B (black) and ANT-W (white).
1 Remove the antenna cables from the routing guides on the display-assembly base.
2 Remove the two screws (M2x2.5) that secure the antenna modules (2) to the middle frame.
3 Carefully peel the tape that secures the antenna cables (2) to the middle frame.
4 Release the antenna modules (2) from the tabs and lift the antenna modules off the middle frame.
50

Removing the antennas

GUID-C93E16BC-C281-4F9C-BCD1-FBC4C1863FA6
Released
computer. After working inside your computer, follow the instructions in
GUID-5988CD6E-6C00-40B4-ACAF-0C1F4E25E170
Released
shield.
GUID-D5931BF5-9BD9-4040-9631-AB3B51DF3024
Released
Removing the antennas
www.dell.com/
24
After working inside