Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the stand.
2
Remove the
back
cover.
Identifier
Status
Procedure
1
Pry the DIMM door on the system-board shield.
2
Locate the memory module on the system board.
NOTE:
Depending on the configuration ordered, your computer may have up to two memory modules installed on the
system board.
26
Removing the memory modules
GUID-AAC0DC5A-1680-492D-804F-52F812D409C2
Released
Removing the memory modules
computer. After working inside your computer, follow the instructions in
GUID-284E791C-B598-4E66-ADC9-E375F8DA4A1F
Released
GUID-F26C6CF1-E963-46AA-87E4-E5F6772D5CEF
Released
10
After working inside
www.dell.com/