Removing The Stand; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

NOTE: The following procedure applies only to computers that are shipped with an articulating stand.
CAUTION: Place the computer on a flat, soft and clean surface to avoid damaging the display.
1 Push the release tab.
2 Hold the tab in the release position and lift the stand off the back cover.
Identifier
Status
Procedure
NOTE: The following procedure applies only to computers that are shipped with a pedestal stand.
GUID-4BBD3587-8BDA-47F1-ACEB-3CE6AB50FBB3
Released
computer. After working inside your computer, follow the instructions in
GUID-50D8EC90-253A-433D-B011-356F94343361
Released
GUID-2C51F551-304E-4D0F-A968-F98F483A9C75
Released

Removing the stand

www.dell.com/
Removing the stand
4
After working inside
15