Removing The Rear-I/O Bracket; Prerequisites; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board
4 Remove the base panel.
Identifier
Status

Procedure

1 Remove the three (M3x5) screws that secure the rear-I/O bracket to the display-assembly base.
2 Lift the rear-I/O bracket off the display-assembly base.
40

Removing the rear-I/O bracket

GUID-3F983EA1-EFFD-4125-9D74-62BA48536BD7
Released
Removing the rear-I/O bracket
computer. After working inside your computer, follow the instructions in
GUID-EE50C4A3-0F7B-4D70-91BA-4753210842A4
Released
shield.
GUID-C6499B7E-6265-4A11-BAC6-6346C2B589CD
Released
18
After working inside
www.dell.com/