Replacing The Memory Modules; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Align the notch on the memory module with the tab on the memory-module slot.
2 Slide the memory module firmly into the slot at an angle.
3 Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
NOTE: Repeat this procedure for each memory module shipped with your computer.
4 Align the tabs on the DIMM door with the slots on the system-board shield, and then snap the DIMM door until it clicks into place.
NOTE: If you do not hear the click, remove the DIMM door and realign it.
28

Replacing the memory modules

GUID-1F5023F5-9868-4AAF-A9F5-BFB400CD890A
Released
Replacing the memory modules
computer. After working inside your computer, follow the instructions in
GUID-6AE10B99-6224-4751-8C70-4DCFE7E271E0
Released
After working inside
www.dell.com/
11