CHAPTER 3 DISASSEMBLY & REASSEMBLY
III. BASE UNIT
1. Control PCB
1) Remove the bottom cover.
(Page 3-1)
2) Remove the 2 cables
the control PCB
trol PCB.
Figure 3-301
3) Pull out the switch slide plate
switch.
Figure 3-302
3-10
2
connected with
1
and remove the con-
1
from the
COPYRIGHT © CANON ELECTRONICS INC. 2012
Notes on assembling
Install the control PCB so that it matches
the positioner.
When installing the control PCB, return the
cable to its original position.
CANON P-208 FIRST EDITION