Canon imageFORMULA P-208 Service Manual With Parts Catalog page 91

5) The firmware is automatically registered.
The "Product Name" and "Firmware ver-
sion" are displayed on the firmware reg-
istration screen.
Figure 5-248
Note: The registered firmware is saved to-
gether within the service tool folder.
Since the product name, version
number, etc. are written in the "mot"
file, the folder name is decided to
match them. Furthermore, an "ini" file
that contains the setting conditions is
saved at the same time. The following
shows an example of the folder.
Figure 5-249
COPYRIGHT © CANON ELECTRONICS INC. 2012
6) Select [Add Note] if necessary and enter
any arbitrary information. After entering
the information, select [OK].
Note: To delete from the registration screen,
select the target version and then se-
lect [Delete]. Note that the file is not
deleted from the folder.
Note: The registered firmware is displayed in
the "Firmware" screen on the next re-
start or when returning from another
screen.
CANON P-208 FIRST EDITION
CHAPTER 5 TROUBLESHOOTING
Figure 5-250
5-25