Adjustment; Registration (Auto) - Canon imageFORMULA P-208 Service Manual With Parts Catalog

CHAPTER 5 TROUBLESHOOTING
3) The information is saved.
The following shows some of the details
in the file that is saved.
Figure 5-221
5-14
B. Adjustment

1. Registration (Auto)

reading-start position and reading-end posi-
tion for feed direction automatically.
tions of a scanned image are improper,
perform this adjustment.
placing
tion-related part such as the reading unit or
the control PCB on which a registration
sensor is installed.
other adjustment items. For details, refer to
"All".
1) The material may be normal white copy
Note: If the shading sheet is used, it can be
Note: Do not use adjustment sheets with
2) For four corners of the leading and trailing
COPYRIGHT © CANON ELECTRONICS INC. 2012
This mode performs adjustments on a
If the leading- and trailing-edge posi-
Also perform this adjustment after re-
or reassembling
This mode can be used together with
Adjustment sheet
The dedicated sheet is required to
execute this mode. However, you can
create the sheet by drawing a black line
on available paper, so it is not specified
as a service tool. Prepare it for yourself.
The sheet is required:
paper, recycled paper or shading sheet
(TKM-0326/0332) that is used in the next
section.
shared with "Light".
black edges, which are used for other
DR scanners. Otherwise, adjustment
cannot be performed correctly.
edges, the black part must be 5 mm long
and 20 mm wide.
a registra-
CANON P-208 FIRST EDITION