Installing A Dimm - Cisco 5100 Series Hardware Installation Manual

Installing a DIMM

To replace the chassis cover, place the cover evenly on the top of the device and use the screws to secure it to
Note
the device.
Installing a DIMM
There are two DDR4 DIMM slots. DIMMs have a polarization notch on the connecting edge to prevent
incorrect insertion.
Figure 11: DIMM Showing Polarization Notch
These are the steps to install a DIMM:
Step 1 Remove the chassis cover.
Step 2
Locate the DIMM module on the device.
Cisco 5100 Enterprise Network Compute System Hardware Installation Guide
22
Installing and Upgrading Field Replaceable Units