Resting Ecg Setup; Acquisition Tab - GE CASE V6.7 Operator's Manual

Resting ECG Setup

Acquisition Tab

A
Revision C
Resting ECG Setup
The settings specific to the resting ECG modality can be entered either
from the resting ECG acquisition screen where you click Setup to display
the setup menu, or from the General tab of the System Configuration (see
"General Tab"
The Acquisition tab with the acquisition settings is already on top.
B C D E F G
A Click to print the resting ECG setup.
B Click to display the other setup tabs.
C
Select
D Select the speed and gain (screen).
E Select the screen format.
F
Select
when an electrode becomes disconnected.
G
Select
baseline fluctuation). Cubic Spline causes a signal delay of approx. 2.
seconds.
H
Click
I Select the thermal writer speed and gain.
J Select the number of rhythm leads to be recorded with the thermal writer.
K Select filter frequency (ECG).
L Click to edit the Reason for Test library (see next page).
M Click to edit the Interpretation library.
N Click to edit the Medications library.
2060290-201
on page 12-40).
H I J K
or deselect display of the 1-mV calibration pulse.
to hear the lead off alarm. If selected, the system will emit a beep
to enable the Cubic Spline algorithm (automatic compensation of
to enable the thermal writer.
CASE
L M N
91A-R
12-3