Honeywell PX940 Installation Instruction page 9

S-Style Port
S-Style Port Pinouts
Pin Signal
1 Media out
2 Signal
ground
3 Ribbon out
4 Error
8
Type Description
Output Goes LOW when the printer is out of media.
Ground Configurable for internal or external source.
Goes LOW when the printer is out of ribbon.
Output
Output Goes LOW during every status that keeps the
printer from printing:
• Printhead lifted
• Ribbon out
• Media out
• General print engine fault
• Front arm lifted
• Verifier calibration required
• Verifier calibration expired
• Exceed maximum barcodes
• Verifier hardware error
• Verifier failure action prompt
PX940 Applicator Interface Installation Instructions