Installing The Water Filter - Makita DVC150L Instruction Manual

4. Finally, mount the tank cover and lock it.
6
6
6
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank 6. Mounting position marking
NOTICE:
Before using the powder filter, make
sure that prefilter and damper are always used
together. It is not allowed to install powder filter solely.

Installing the water filter

Optional accessory for cloth filter model
CAUTION:
Never pick up water or wet dust with-
out the float and the cloth filter or the water filter.
CAUTION:
For picking up wet dust, make sure that
the float cage and the float are installed on the cleaner.
CAUTION:
When installing the water filter on the
tank, set it tight at the opening of the tank so that the hook
of the water filter engages the tank opening firmly and
there is no space between the water filter and the tank.
To pick up water or wet dust only, the water filter is more
suitable than the cloth filter.
When installing the water filter, align its mounting posi-
tion mark with the one on the tank.
3
3
► 1. Water filter 2. Tank 3. Mounting position marking
NOTE: It is recommended using water filter when
picking up large amount of water repeatedly. Otherwise
1
vacuum ability may be reduced in case of cloth filter.
Installing the paper pack
Optional accessory
2
WARNING:
use the cloth filter or prefilter together that is
preinstalled on the cleaner. Failure to use the cloth
3
filter / prefilter together may cause unusual noise and
heat, resulting in a fire.
4
CAUTION:
Never pick up water or other liquids or wet
•
dusts when using the paper pack. Picking up
such things may cause the paper pack breakage.
Before using the paper pack, make sure that pow-
•
5
der filter (optional accessory), damper (optional
accessory) and prefilter are always used together.
CAUTION:
Before using the paper pack, make sure
•
that powder filter, damper and prefilter are
always used together.
1. Remove the rubber holder.
1
► 1. Rubber holder
2. Extend the paper pack.
3.
Align the paper pack opening with the dust suction
opening of the cleaner.
4. Insert the cardboard of the paper pack onto the holder
so that it is positioned at the end beyond the detent protrusion.
1
1
2
► 1. Paper pack 2. Holder
10 ENGLISH
When using the paper pack, also
(For the cloth filter model)
(For the powder filter model)
1
2