Viewing System; Mounting The Cs6X Versa; Docking - RIDGID SeeSnake CS6x Versa Operator's Manual

Viewing System

The CS6x Versa's position can be adjusted to create a de-
sired viewing angle. Grasp the mounting frame and rotate
the kickstand to adjust the viewing angle.

Mounting the CS6x Versa

Inner Mounting
Plate
The CS6x Versa can be seated on either the inner or outer
mounting plate to bring it into a low or high position.
1. Remove the CS6x Versa from the frame. Squeeze
each pair of black and red mounting clips until the mon-
itor disengages from the plate.
2. Center the CS6x Versa over the desired mounting plate.
3. Firmly push the monitor down until you hear the clips
lock the monitor into place.
16 – English – CS6x Versa
1.800.561.8187
Outer Mounting
Plate
Mounting Clips
www.

Docking

The CS6x Versa is designed to dock onto the Compact M40,
Compact C40, and Compact2 reels.
Ensure the docking joints on both sides of the CS6x Versa
are locked into the joint sockets. Always carry the system by
the Compact reel's frame handle.
1. Turn the docking joints on sides of the kickstand so that
the openings point down.
Docking Joint
Docking Joint
2. Center the CS6x Versa over the docking fins and align
the docking joints with the joint sockets.
Joint Sockets
Docking Fins
3. Firmly push the monitor down into the docking system
until you feel the monitor lock into place.
information@itm.com
.com
Quick-Release Knob