Summary of Contents for RIDGID SeeSnake Compact C40
Page 1
Operator’s Manual With With Te chnology Te chnology WARNING! Read this Operator’s Man- ual carefully before using this tool. Failure to under- For support and additional information stand and follow the con- about using your Compact C40 go to tents of this manual may support.seesnake.com/compact-c40 result in electrical shock, or scan this QR code.
Table of Contents Introduction Regulatory Statements ............................... 3 Safety Symbols ................................3 General Safety Rules Work Area Safety ................................ 4 Electrical Safety ................................4 Personal Safety ................................4 Equipment Use and Care ............................5 Pre-Operation Inspection ............................5 Compact C40 Overview Description .................................
Introduction Safety Symbols In this manual and on the product, safety symbols and The warnings, cautions, and instructions dis- signal words are used to communicate important safety cussed in this manual cannot cover all possi- information. This section is provided to improve under- ble conditions and situations that may occur.
General Safety Rules Personal Safety • Stay alert, watch what you are doing, and use com- WARNING mon sense when operating equipment. Do not use equipment while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating equipment may result in serious injury.
Equipment Use and Care Pre-Operation Inspection • Do not force equipment. Use the correct equipment WARNING for your application. The correct equipment does the job better and more safely. • Do not use equipment if the power switch does not turn it on and off. Any equipment that cannot be controlled with the power switch is dangerous and must be repaired.
Compact C40 Overview Description TruSense Technology Description ™ The RIDGID SeeSnake Compact C40 camera reel of- ® ® fers fast, easy setup and can take on the most diverse TruSense technology establishes a two-way communi- and demanding inspection conditions. The Compact C40...
‡ While the camera can function in extreme temperatures, some image quality changes may occur. Frequency 512 Hz Distance Measurement Type TruSense Counter Standard Equipment • SeeSnake Compact C40 Data Communication Two-Way • Docking System Push Cable • Operator’s Manual Length 40 m [131 ft] •...
Specific Safety Information System Components WARNING Frame Docking System This section contains important safety information that is specific to the Compact C40. Read these pre- cautions carefully before using the equipment to re- duce the risk of electrical shock, fire, and/or serious injury.
Operating Instructions Inspection Overview To perform a pipe inspection, connect any See Snake Placement monitor to the reel, power on the system, push the push cable through the pipe, and observe the display. Set up your SeeSnake system near the pipe entrance so you can manipulate the push cable while viewing the For advanced inspection options, such as capturing monitor.
CS6x Versa Docking System Removing the Monitor 1. Place the Compact C40 so you can grasp both WARNING quick-release knobs. Do not carry the Compact C40 by the monitor’s 2. Pull both knobs out and away from the docking fins. mounting frame or kickstand.
System Cable Removal System Cable Installation 1. Disconnect the system cable from the reporting To install the system cable, follow these steps: monitor and remove the monitor from the docking 1. Align the arrow on the slip-ring dial with the unlock system.
Maintaining Components Service and repair of the camera reel must be performed at a RIDGID Independent Authorized Service Center. To find your nearest service center or for any service or re- Camera Head pair questions: Scratches on the camera have a minimal effect on its •...
Page 16
RIDGID and the RIDGID logo are trademarks of Ridge Tool Company, registered in the USA and other countries. All other registered and unregistered trademarks and logos mentioned herein are the property of their respective owners. Mention of third- party products is for informational purposes only and constitutes neither an endorsement nor a recommendation.