Table of Contents
Advertisement
MVCI Status
SDIO-2:
View Status
Battery Charger
14.4.4 - Host Status
Not applicable. The status always appears Inactive.
MVCI Status
Battery Charger
Host Status:
Inactive
14.5 - Software Version
From the User Config menu, select Software Version and press ENTER.
User Config
MVCI Setup
User Customize
MVCI Status
Software Version
The MVCI displays the software versions.
NOTE: These screens are examples only. Actual data will vary.
Version
BootLoader:1.0
Kernel(A):1.0
Kernel:1.0
RFS(A):1.1
14.6 - Hardware Test
The MVCI includes several hardware tests that can check to make sure your MVCI is operating properly.
From the User Config menu, select Hardware Test and press ENTER.
These options are available:
•
Beep Test
•
LED Test
•
LCD Test
•
Keypad Test
•
Serial Number
•
Device Loopback Test
•
SDMEM Card Test
14.6.1 - Beep Test
This test turns on the beep for 3 seconds.
Select Beep Test and press ENTER.
Page 20
On
On
v2.1
Advertisement
Table of Contents
