14.2.1 - Contrast Control
To change the MVCI screen contrast (brightness), select View & Set under Contrast Control and press ENTER.
MVCI Setup
Contrast Control:
View & Set
Font Size:
Small Font
Use the left/right buttons to change the contrast percentage. Press ENTER to save the changes, or ESC to cancel.
Contrast
Contrast Control:
IIIIIIIIIIIIIII---------------
14.2.2 - Font Size
The MVCI can display a large font or a small font.
To change the font size, select Small Font under Font Size and press ENTER.
NOTE: The factory default is Small Font. Large font is not available on all screens.
MVCI Setup
Contrast Control:
View & Set
Font Size:
Small Font
Highlight the desired option, then press ENTER to save the changes, or press ESC to cancel.
Font Size
Small Font
Large Font
You can also use the keypad buttons to change the font size:
To display large font, hold the right arrow for at least one second. The MVCI changes to large font.
To display small font, hold the left arrow for at least one second. The MVCI changes back to small font.
14.3 - User Customize
From the User Config menu, select User Customize and press ENTER.
The following options are available:
•
Language
•
Beep Menu
14.3.1 - Language
The MVCI supports several languages. Please use only American English (default) or Français (Canada), because these
two languages are currently the only supported languages if technical support is needed.
Page 17
46%
Font Size
Saving ...
v2.1