Table of Contents
Advertisement
NOTE: Do not remove the SD card unless it is faulty and needs to be replaced.
To view the status of SDIO-1 slot, select View Status and press ENTER.
MVCI Status
SDIO-1:
View Status
SDIO-2:
View Status
The status screens appear. Scroll down to see all status items.
SDIO-1
Power:
Card Status:
Inserted
These screens are for information only. You cannot change the settings on these screens. Press ESC to return to the
previous menu.
14.4.2 - SDIO-2
The SDIO-2 slot has the MVCI wireless card inserted. It allows the MVCI to communicate on a wireless network.
NOTE: Do not remove the MVCI wireless card unless it is faulty and needs to be replaced.
To view the status of SDIO-2 slot, select View Status and press ENTER.
MVCI Status
SDIO-1:
View Status
SDIO-2:
View Status
The status screens appear. Scroll down to see all status items.
SDIO-2
Power:
Card Status:
Inserted
These screens are for information only. You cannot change the settings on these screens. Press ESC to return to the
previous menu.
14.4.3 - Battery Charger
This screen indicates if the MVCI batteries are being charged. You cannot change this setting.
NOTE: To extend the battery life, the MVCI stops charging the batteries when the MVCI's
internal temperature is 140
rebooted and the temperature is below 140
Page 19
SDIO-1
Write Protected:
On
Over Current:
SDIO-2
Write Protected:
On
Over Current:
°
°
F (60
C) or more. Battery charging continues after the MVCI is
Off
No
Off
No
°
°
F (60
C).
v2.1
Advertisement
Table of Contents
