Specifications - Makita DHW080 Instruction Manual

To ensure machine safety, use only original spare parts from the
•
manufacturer or approved by the manufacturer.
Always be sure that the tool is switched off and battery cartridges
•
are removed before carrying out any work on the tool.
Do not use the machine if important parts of the machine are
•
damaged, e.g. safety devices, high pressure hoses, trigger gun.
Always remove the battery cartridges when leaving the machine
•
unattended.
Comply with the requirements of the local water supply company.
•
For European countries:
•
According to EN12729 (BA), the appliance can also be con-
nected to the mains drinking water supply if a backflow preventer
valve with drain facility is installed in the supply hose.

SPECIFICATIONS

Model:
*1
Max. feed volume
*2
Water flow rate
Max. permissible pressure
*2
Working pressure
Max. feed pressure
Max. feed temperature
Max. suction height
Rated voltage
Dimensions
(L x W x H)
Weight
*1 : When using the washing brush.
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
High mode
Low mode
High mode
Low mode
438 mm x 218 mm x 269 mm
*2 : When using the spray lance.
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
3 ENGLISH
DHW080
6.3 L/min
5.5 L/min
4.0 L/min
8.0 MPa
5.5 MPa
3.0 MPa
1.0 MPa
40 °C
1 m
D.C. 36 V
7.1 kg - 7.7 kg
DC18SH