Makita DHW080 Instruction Manual page 14

NOTE: The fitting depends on the shape of the faucet
to which you connect. Prepare a suitable commercial-
ly-bought fitting.
3.
Attach the water hose connector to the inlet (with
the faucet marking) and then insert the coupling sleeve.
1
► 1. Coupling sleeve 2. Water hose connector 3. Inlet
on the high pressure washer
Connecting/disconnecting the
nozzle
CAUTION:
Always lock the trigger of the
trigger gun when connecting/disconnecting the
nozzle.
Insert the end of the nozzle into the slot on the trigger
gun and turn it in the direction of the arrow as shown in
the figure. To disconnect the nozzle, turn the nozzle in
the reverse direction while pressing it toward the trigger
gun.
1
► 1. Trigger gun 2. Slot 3. End of the nozzle
3
2
3
2
Connecting the foam nozzle
Optional accessory
CAUTION:
Always lock the trigger of the
trigger gun when connecting/disconnecting the
nozzle.
Prepare detergent before using the foam nozzle.
1.
Remove the nozzle from the tank by rotating the
nozzle counterclockwise. Attach the nozzle to the trig-
ger gun.
1
► 1. Nozzle 2. Trigger gun
2. Pour the detergent into the tank and install it to the
nozzle.
► 1. Tank
NOTICE:
Always use neutral detergent. Acidic or
alkaline detergent may damage the tank or nozzle.
14 ENGLISH
2
1