High pressure hoses, fittings and couplings are important for the
•
safety of the machine. Use only hoses, fittings and couplings
recommended by the manufacturer.
To ensure machine safety, use only original spare parts from the
•
manufacturer or approved by the manufacturer.
Always be sure that the tool is switched off and battery cartridges
•
are removed before carrying out any work on the tool.
Do not use the machine if important parts of the machine are
•
damaged, e.g. safety devices, high pressure hoses, trigger gun.
Always remove the battery cartridges when leaving the machine
•
unattended.
Comply with the requirements of the local water supply
•
company.
For European countries:
•
According to EN12729 (BA), the appliance can also be con-
nected to the mains drinking water supply if a backflow preventer
valve with drain facility is installed in the supply hose.
SPECIFICATIONS
Model:
*1
Max. feed volume
*2
Water flow rate
High mode
Low mode
Max. permissible pressure
*2
Working pressure
High mode
Low mode
Max. feed pressure
Max. feed temperature
Max. suction height
Rated voltage
Dimensions
(L x W x H)
Weight
Water protection
*1 : When using the washing brush.
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
DHW080
6.3 L/min
5.5 L/min
4.0 L/min
8.0 MPa
5.5 MPa
3.0 MPa
1.0 MPa
40 °C
1 m
D.C. 36 V
438 mm x 218 mm x 269 mm
7.1 kg - 7.7 kg
IPX5
*2 : When using the spray lance.
11 ENGLISH