Makita DLM431 Manual page 7

4-2 DC motor
4-2-1 Disassembling
Fig. 4-2-1-1
[1] Remove Blade 430.
[2] Pull Lock lever.
[3] Turn Battery cover complete.
Battery cover
complete
Fig. 4-2-1-3
[5] Loosen two 5x25 Tapping screws, and remove Grip A.
Fig. 4-2-1-5
[7] Shift Change lever to the position of Cutting height
between 40 and 60mm.
Change lever
Lock lever
Grip A
5x25 Tapping
screw (2 pcs.)
7 / 21
Fig. 4-2-1-2
[4] Remove Battery cover complete by releasing Battery
cover complete from the hinges.
Battery cover
complete
Fig. 4-2-1-4
[6] Loosen seven 4x18 Tapping screws.
Cowling
Change lever
Fig. 4-2-1-6
[8] Pass Terminal housing through the square hole of
Cowling without disconnecting the lead wires as shown
below. Cowling can be removed.
Terminal housing
Hinge
4x18 Tapping
screw (7 pcs.)
Terminal
housing set
Cowling
Square hole of
Cowling