Makita DLM431 Manual page 15

4-6 Protective shield (For Canada only)
4-6-1 Disassembling
Fig. 4-6-1-1
[1] Loosen two 4x18 Tapping screws, and
remove Protective shield section.
4x18 Tapping Protective shield
screw (2 pcs.)
4-6-2 Assembling
Fig. 4-6-2-1
[1] Mount Protective shield into the grooves of Protective
shield holder.
Grooves of Protective shield holder
[3] Assemble two Stop rings E-7 to Rod 8.
Rod 8
Stop ring E-7
[2] The component parts of Protective shield section are as follows:
Protective shield
Fig. 4-6-2-3
Stop ring E-7
15 / 21
Fig. 4-6-1-2
Protective shield
Stop ring E-7
Fig. 4-6-2-2
[2] Insert Rod 8 into Protective shield.
Protective shield holder
Rod 8
Stop ring E-7
Protective shield
Rod 8