Phone Setup - Cisco 8800 Series Manual

New and Changed Information for Firmware Release 11.0
Revision
Added Connect to a Pre-Configured Wi-Fi Network
New and Changed Information for Firmware Release 11.0
The following table describes changes to this book to support Firmware Release 11.0.
Table 13: Cisco IP Phone 8800 User Guide revisions for Firmware Release 11.0.
Revision
Removed references to specific font size.
Updated the following section for improved Barge
and Merge support.
Revised the following section for the improved
Problem Report Tool support.
Added new icon to the following section for Do Not
Disturb(DND).
Updated the following section for Welcome screen.

Phone Setup

Your administrator sets up your phone and connects it to the network. If your phone is not set up and connected,
contact your administrator for instructions.
Adjust the Handset Rest
If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Your Phone
8
Updated Section
Connect to a Preconfigured Wi-Fi Network, on page
11
Updated Section
Change the Font Size.
Add Yourself to a Call on a Shared Line
Report All Phone Issues , on page 42
Turn On Do Not Disturb
Connect to Expressway, on page 13
Your Phone