Download Print this page

Headset Connection - Cisco 730 Manual

Hide thumbs Also See for 730:

Your Headset

Headset Connection

Connect Your Headset to a Bluetooth Device

Put your headset into pairing mode to make it discoverable to other devices. Your Cisco Headset 730 can

save up to eight different Bluetooth devices and maintain simultaneous connections with up to two devices

at once.

Note

If you already have two active Bluetooth sources, you must disconnect one before you can save another

Bluetooth device to your headset.

You can also follow the prompts in the Cisco Headsets app when you connect your headset to your mobile

phone.

Procedure

Step 1

Slide up and hold the Power/Bluetooth switch for two seconds until the Bluetooth LED blinks.

Step 2

Enable Bluetooth on your device.

You can enable and disable Bluetooth from the Settings menu on most call devices.

Step 3

Select your headset from the device list.

Your headset will appear in the device list as Cisco HS 730 followed by the last three digits of your headset

serial number.