Makita DLM382 Instruction Manual page 13

Removing or installing the mower
blade
WARNING:
Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING:
The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING:
Always wear gloves when han-
dling the blade.
Removing the mower blade
For DLM382
1. Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2. To lock the blade rotation, insert a screwdriver or a
similar tool into a hole on the mower body.
3. Turn the bolt counterclockwise with the wrench.
1
2
► 1 . Mower blade 2. Screwdriver 3. Wrench
4. Remove the bolt and blade in order.
► 1 . Blade support 2. Mower blade 3. Bolt
For DLM432
1.
height adjusting lever comes to the upper side.
2.
similar tool into a hole on the mower body.
3.
► 1 . Mower blade 2. Screwdriver 3. Wrench
4.
inner flange in order.
3
► 1 . Inner flange 2. Mower blade 3. Outer flange
Installing the mower blade
To install the mower blade, take the removal procedure
1
in reverse.
2
It has a top/bottom facing. Place the blade so that
the rotational direction arrow faces outward.
to secure the blade.
and all the fixing parts are installed correctly and
3
tightened securely.
always follow the instructions provided in this
manual.
13 ENGLISH
Put the mower on its side so that the mowing
To lock the blade rotation, insert a screwdriver or a
Turn the bolt counterclockwise with the wrench.
1
2
Remove the bolt, outer flange, mower blade, and
4. Bolt
WARNING:
Install the mower blade carefully.
WARNING:
Tighten the bolt clockwise firmly
WARNING:
Make sure that the mower blade
WARNING:
When you replace the blades,
3
1
2
3
4