Maintenance - Makita DRV150 Instruction Manual

Available blind rivets
NOTICE:
Using nose piece, jaw, jaw pusher, or pipe that does not match the mandrel diameter may cause
poor fastening, clogging of the mandrel, or malfunction of the tool.
NOTE:
For DRV150
Rivet
Size Diameter of
mandrel
ø2.4 mm ø1.4 -
ø3.2 mm ø1.8 -
2.1 mm
ø4.0 mm ø2.2 -
ø4.8 mm
3.2 mm
For DRV250
Rivet
Size Diameter of
mandrel
ø2.4 mm ø1.4 -
ø3.2 mm ø1.8 -
2.1 mm
ø4.0 mm ø2.2 -
ø4.8 mm
3.2 mm
ø3.1 -
3.5 mm
ø3.5 -
3.9 mm

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Nose piece
Mark on Hole
nose piece diameter
2.4 ø1.9 mm
3.2 ø2.4 mm
4.0 ø3.0 mm
4.8
Nose piece
Mark on Hole
nose piece diameter
2.4 ø1.9 mm
3.2 ø2.4 mm
4.0 ø3.0 mm
4.8
ø4.0 mm
ø4.4 mm
Mark on jaw Jaw pusher
Hole
diameter
4.8 ø1.9 mm
4.8 ø2.5 mm
4.8 ø3.1 mm
4.8
Mark on jaw Jaw pusher
Hole
diameter
4.8 ø1.9 mm
4.8 ø2.5 mm
4.8 ø3.1 mm
ø4.0 mm
Cleaning the jaws and jaw case
Interval of cleaning:
1.
2.
Fig.13: 1. Jaw case 2. Jaw
3.
4.
Fig.14: 1.
8 ENGLISH
Pipe
Color Hole
diameter
ø2.2 mm
Black
None *
Black None *
Pipe
Color Hole
diameter
ø2.2 mm
Black
ø3.4 mm
Black ø4.1 mm
ø4.1 mm
Black ø4.5 mm
2. Jaw case
Color
Silver
Black
–
–
Color
Silver
Black
Silver
Black
Black
Silver