5.
Fig.15: 1. Jaw 2. Jaw case
NOTICE:
When installing the jaws, be sure to
align the tips of jaws.
6.
Fig.16: 1.
adhered 2. Jaw
7.
8.
down, and left and right, then remove it from the nose
cloth. Repeat the same procedure twice or 3 times.
NOTICE:
If the grease is adhered to the tip
or inside of the jaw, the jaws may slip during
operation.
Replacing the jaws in the jaw case
Removing jammed rivet
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
accessories or attachments might present a risk of
for its stated purpose.
Center.
•
Nose piece
•
Jaw pusher
•
Jaw
•
Pipe
•
Grease
NOTE:
-
9 ENGLISH