Operation - Makita DRV150 Instruction Manual

ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Installing or removing the head
assembly
1. Loosen the nut of the head, and then remove the
head.
Fig.5: 1. Nut 2. Head
2. Loosen the nose piece with a wrench while hold-
ing the head with another wrench.
Fig.6: 1. Nose piece 2. Head
3.
Fig.7: 1. Jaw case 2. Joint
4.
Fig.8: 1. Jaw pusher 2. Spring 3. Pipe
NOTICE:
When installing the jaw pusher, be sure
to attach the spring to the jaw pusher.

OPERATION

CAUTION:
Keep your hand or face away from
the front part of the tool.
Installing a blind rivet
CAUTION:
Before the mandrel container
becomes full, empty it regularly by removing the
mandrel container.
CAUTION:
When inserting a blind rivet into
the nose piece, be sure to switch off the tool.
CAUTION:
Do not the leave a blind rivet in the
nose piece.
Hook
CAUTION:
hanging the tool with the hook.
CAUTION:
tion or on potentially unstable surface.
CAUTION:
hook, hang it carefully.
Fig.9: 1. Groove 2. Hook 3. Screw
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
Installing or removing the mandrel
container
NOTICE:
Be sure to install the mandrel container
to the tool before operating the tool. If the man-
drel container is not installed to the tool, the tool
will not operate.
To remove the mandrel container, rotate it counter
clockwise. To install the mandrel container, rotate it
clockwise.
-
Fig.10: 1. Mandrel container
NOTICE:
After installing a blind rivet, be sure
to eject the broken off mandrel into the mandrel
container by tilting the tool backward before
installing next blind rivet. If the end of the broken
off mandrel sticks out from the nose piece, switch
off the tool and remove the mandrel. Otherwise,
cause a malfunction of the tool.
1.
Fig.11: 1. Blind rivet 2. Nose piece
-
2. Press the tool tip against the workpiece, and then
release the switch trigger.
Fig.12
7 ENGLISH
Always remove the battery when
Never hook the tool at high loca-
When hanging the tool with the