Maintenance - Makita DRV150 Instruction Manual

Installing a blind rivet
CAUTION:
Before the mandrel container
becomes full, empty it regularly by removing the
mandrel container. Otherwise, the tool may be dam-
aged, and the damaged parts may cause an injury.
CAUTION:
When inserting a blind rivet into
the nose piece, be sure to switch off the tool.
Otherwise, you may be injured with the tool tip.
CAUTION:
Do not the leave a blind rivet in the
nose piece. If the tool is switched on accidentally, the
blind rivet is ejected and may cause an injury.
Available blind rivets
NOTICE:
Using nose piece, jaw, jaw pusher, or pipe that does not match the mandrel diameter may cause
poor fastening, clogging of the mandrel, or malfunction of the tool.
Refer to the table below for the combination of rivet, nose piece, jaw, jaw pusher, and pipe.
NOTE: Some items in the table may be included in the tool package as standard accessories and some items in
the table are provided as optional accessories. They may differ from country to country.
For DRV150
Rivet
Size Diameter of
mandrel
ø2.4 mm (3/32") ø1.4 - 1.6 mm
ø3.2 mm (1/8") ø1.8 - 2.1 mm
ø4.0 mm (5/32") ø2.2 - 2.6 mm
ø4.8 mm (3/16") ø2.6 - 3.2 mm
*. Pipe is not necessary for operation.
For DRV250
Rivet
Size Diameter of
mandrel
ø2.4 mm (3/32") ø1.4 - 1.6 mm
ø3.2 mm (1/8") ø1.8 - 2.1 mm
ø4.0 mm (5/32") ø2.2 - 2.6 mm
ø4.8 mm (3/16") ø2.6 - 3.2 mm
ø6.0 mm (1/4") * ø3.1 - 3.5 mm
ø6.4 mm (1/4") * ø3.5 - 3.9 mm
*. Stainless steel rivet is not available.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
Nose piece
Mark on Hole
nose piece diameter
2.4 ø1.9 mm
3.2 ø2.4 mm
4.0 ø3.0 mm
4.8 ø3.6 mm
Nose piece
Mark on Hole
nose piece diameter
2.4 ø1.9 mm
3.2 ø2.4 mm
4.0 ø3.0 mm
4.8 ø3.6 mm
6.0 ø4.0 mm
6.4 ø4.4 mm
NOTICE:
After installing a blind rivet, be sure
to eject the broken off mandrel into the mandrel
container by tilting the tool backward before
installing next blind rivet. If the end of the broken
off mandrel sticks out from the nose piece, switch
off the tool and remove the mandrel. Otherwise,
the broken off mandrels may become clogged and
cause a malfunction of the tool.
1. Insert the blind rivet into the nose piece.
► Fig.11: 1. Blind rivet 2. Nose piece
2.
Press the tool tip against the workpiece, and then
pull the switch trigger. After the mandrel is broken off,
release the switch trigger.
► Fig.12
Before the mandrel container becomes full, empty it
regularly by removing the mandrel container.
Mark Jaw pusher
on jaw
Hole
diameter
4.8 ø1.9 mm
4.8 ø2.5 mm
4.8 ø3.1 mm
4.8 ø3.6 mm
Mark Jaw pusher
on jaw
Hole
diameter
4.8 ø1.9 mm
4.8 ø2.5 mm
4.8 ø3.1 mm
4.8 or 6.4 ø3.6 mm
6.4 ø4.0 mm
6.4 ø4.6 mm
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
9 ENGLISH
Pipe
Color Hole
diameter
Gray ø2.2 mm
Black ø2.6 mm
Gray None *
Black None *
Pipe
Color Hole
diameter
Gray ø2.2 mm
Black ø2.6 mm
Gray ø3.4 mm
Black ø4.1 mm
Gray ø4.1 mm
Black ø4.5 mm
Color
Silver
Black
–
–
Color
Silver
Black
Silver
Black
Black
Silver