Specifications - Makita DRV150 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Pulling force
Stroke
Overall length
Rated voltage
Net weight
•
Applicable battery cartridge and charger
Charger
•
WARNING:
Only use the battery cartridges and chargers listed above.
Intended use
Noise
Model DRV150
Model DRV250
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
DRV150
10 kN
25 mm
313 mm
1.9 - 2.2 kg
Vibration
Model DRV150
-
Model DRV250
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING:
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
4 ENGLISH
DRV250
20 kN
30 mm
323 mm
D.C. 18 V
2.1 - 2.4 kg
DC18SH
2
or less
h
2
2
or less
h
2
The vibration emission during
Be sure to identify safety mea-
-
-