Applicable battery cartridge and charger Charger DC18SH • WARNING: Only use the battery cartridges and chargers listed above. Intended use Vibration Noise Model DRV150 or less Model DRV150 Model DRV250 or less Model DRV250 NOTE: measured in accordance with a standard test method NOTE:...
SAVE THESE INSTRUCTIONS. Do not point the tool at a person or yourself when operating the tool. CAUTION: Only use genuine Makita batteries. Important safety instructions for battery cartridge charger. Before using battery cartridge, read all instruc-...
FUNCTIONAL DESCRIPTION NOTE: Depending on the conditions of use and the CAUTION: Always be sure that the tool is Tool / battery protection system switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before...
Hook ASSEMBLY CAUTION: Always remove the battery when CAUTION: Always be sure that the tool is hanging the tool with the hook. switched off and the battery cartridge is removed CAUTION: Never hook the tool at high loca- before carrying out any work on the tool. tion or on potentially unstable surface.
NOTICE: Using nose piece, jaw, jaw pusher, or pipe that does not match the mandrel diameter may cause poor fastening, clogging of the mandrel, or malfunction of the tool. NOTE: For DRV150 Rivet Nose piece Mark on jaw Jaw pusher...
Replacing the jaws in the jaw case Removing jammed rivet OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool accessories or attachments might present a risk of for its stated purpose. Center. • Nose piece •...
Page 10
Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan www.makita.com...