Operation - Makita BV4500-118 Instruction Manual

Fig.11
1. Mandrel container
You can install the cap instead of the mandrel container.
Fig.12
1. Cap
NOTICE:
When the cap is attached to the tool,
use the tool only for operations that do not break
off mandrel. If the tool is used for operations that
cause malfunction of the tool.

OPERATION

CAUTION:
Never bring the tool to your face
while operating the tool.
CAUTION:
Never bring your hand or face
to the moving parts while operating the tool.
Installing a blind rivet or lockbolt
(with breaking off a mandrel)
CAUTION:
Before the mandrel container
becomes full, empty it regularly by removing the
mandrel container.
CAUTION:
When inserting a blind rivet or
lockbolt into the nose piece, be sure to switch
off the tool.
tool tip.
1. Insert the blind rivet or lockbolt into the nose
piece.
1
1
Fig.13
1. Blind rivet 2. Nose piece
2. Press the tool tip against the workpiece, and then
pull the switch trigger. After the mandrel is broken off,
release the switch trigger.
1
Fig.14
Installing a lockbolt (without
breaking off a mandrel)
1
Fig.15
1. Pin 2. Collar
1. Insert the pin into the hole. Attach the collar to the
-
pin.
2. Fit the pin on the hole of the nose piece, and then
press the tool against the collar. Pull the switch trigger.
3. Release the switch trigger and withdraw the tool.
8 ENGLISH
2
2