Table of Contents
Advertisement
3.9
Antenna adjustment and mounting
Requirements
Radio installation requirements
ATTENTION
Professional Installation is required to insure conformity with Federal Communications
Commission (FCC) in the USA, Industry Canada (IC) in Canada and the Radio and
Telecommunications Terminal Equipment Directive, 1999/5/EC (R&TTE), in the European
Union (EU).
Professional installation is required for the selection and installation of approved antennas and
setup of the maximum allowable radiated power from the SmartLine Wireless Transmitter as
configured for the particular installation site.
The antenna used for this transmitter must be installed to provide a separation distance of at
least 20 cm (8 inches) from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
For remote antenna, see antenna installation requirements to satisfy FCC RF exposure
requirements.
ATTENTION
Federal Communications Commission (FCC):
The SmartLine Wireless Transmitters comply with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Industry Canada (IC):
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF fields in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's web site www.hc-sc.gc.ca/rpb.
Integral antenna
WARNING
POTENTIAL ELECTROSTATIC CHARGING HAZARD
The integrally mounted antenna shroud may have a surface resistance
greater than 1Gohm per square. When the SmartLine transmitter is installed
in potentially hazardous locations care should be taken not to electrostatically
charge the surface of the antenna shroud by rubbing the surface with a cloth,
or cleaning the surface with a solvent. If electrostatically charged, discharge
of the antenna shroud to a person or a tool could possibly ignite a
surrounding hazardous atmosphere.
Revision 1
SmartLine Wireless Temperature and Universal I/O User's Manual
3. Installation
3.9. Antenna adjustment and mounting
21
Hide quick links:
Advertisement
Table of Contents
