Honeywell NOTIFIER NCD Instruction Manual page 24

Programming
Display
Tap the touch point to access the back-light brightness setting, wallpaper settings and clean mode.
DISPLAY
Tap and hold the slide touch
Brightness
point to adjust the back-light brightness.
Setting the display brightness above 75%
for prolonged periods of time will
decrease the overall life of the display.
Tap the touch point
Clean mode
to activate clean mode. Once activated,
clean mode disables the touch response to
allow for cleaning of the screen. A count-
down timer is displayed providing indica-
tion of time left before the system exits
Clean Mode. The Clean Mode countdown
timer is programmable through VeriFire
Tools and defaulted to 15 seconds. Refer
to the VeriFire Tools for additional infor-
mation.
A Wallpaper image can be
Wallpaper
downloaded from VeriFire Tools, to be
displayed on the System Normal screen.
NOTE: It is recommended to use only a dry clean, lint free/microfiber cloth to clean the display. If additional cleaning is needed, apply a
small amount of Isopropyl alcohol to the cloth and wipe clean. Do not use detergents, solvents, or water for cleaning. Do not spray liquid
directly onto the display.
CAUTION: SETTING THE DISPLAY BRIGHTNESS ABOVE 75% FOR PROLONGED PERIODS OF TIME WILL
!
DECREASE THE OVERALL LIFE OF THE DISPLAY.
Tap the touch point
About
display the model number, application,
boot version, kernel version, database,
database revision, network, and system
update information.
Tap the touch point
System Update
S U to access application,
YSTEM PDATE
kernel, full system, and wallpaper
update capabilities. To update the
application tap the touch point
. To update the kernel tap
APPLICATION
the touch point
UPDATE KERNEL
update the full system tap the touch
point
UPDATE FULL SYSTEM
the wallpaper tap the touch point
UPDATE WALLPAPER
the virtual keyboard will appear once
the selected update is tapped on, tap in
the file name to update and then tap the
touch point
PREFORM UPDATE
plete the update. Updates can be done
from a file on a USB drive connected
to the panel.
Tap the touch point
Users
add or remove a user, change the pass-
word for a user account, or recover a
password for a user account.
24
CLEAN
FIRE ALARM
CO ALARM
SUPERVISORY
TROUBLE
DISABLE
OTHER
SIGNALS
SILENCED
to
ABOUT
FIRE ALARM
CO ALARM
UPDATE
SUPERVISORY
. To
TROUBLE
. To update
DISABLE
. For all updates
OTHER
to com-
SIGNALS
SILENCED
to
USERS
System Normal
Figure 3.6 Display Screen
System Normal
Menu - > Settings - > About
About
System Update
Model
NOTIFIER NCD
Application
Version: 1.000.226 Date: 9/01/2016 Time: 11:12AM
Boot
Unknown
Kernel
Unknown
Database
Version: 1.000Date: 9/01/2016 Time: 11:12AM
Figure 3.7 About Screen
NCD Instruction Manual — P/N LS10210-051NF-E:C 2/18/2019
Menu Navigation
Thu 2/22/18
1:38:06PM
Silence Reset
Ack
Tue 01/22/18
02:38:06PM
Master
Reset
Ack Silence