To Install Replacement Cable; Accessories - RIDGID K-400 Operator's Manual

K-400 Drain Cleaning Machine
3. Pull end of old cable from drum and discard.

To Install Replacement Cable

1. To make cable installation easier, completely uncoil
new cable before proceeding. Use caution when re-
moving the cable from the package. The cable is
under tension and could strike the user. Adding a 30
degree bend about 4 inches from the drum end of
cable will facilitate it entering the drum.
2. Insert about 24 inches of cable through the guide
tube into the drum.
NOTICE Cable should coil into the drum in a counter-
clockwise direction (Figure 17) .
Figure 17 – Coil Cable Into Drum As Shown
3. Reach inside the drum and maneuver end of cable so
that it is between the cable clamp and back plate. The
end of the cable should extend at least 3" past the
clamp.
4. Retighten the screws to clamp the cable against the
back plate and back wall of the drum.
5. Feed cable into drum.

Accessories

WARNING
Only the following RIDGID products have been de-
signed to function with the K-400 Drain Cleaning
Machine. Other accessories suitable for use with
other tools may become hazardous when used on
the K-400. To prevent serious injury, use only the ac-
cessories specifically designed and recommended
for use with the K-400, such as those that follow.
16
IW (Integral Wound) Solid Core Cables
Catalog
No.
87577
87582
87587
91037
87592
87597
91042
Tools – Fits C-31IW, C-32IW, C-33IW, C-44IW and C-45IW
Catalog
No.
62990
62995
63000
63065
63005
63010
63015
63020
63025
63030
63035
63040
63045
63050
63055
63060
49002
12128
Accessories
Catalog
No.
41937
70032
59230
59225
26773
27048
92607
92682
92687
26778
51317
59982
59987
Ridge Tool Company
Model
No. Description
C-31IW 50' (15m) IW Cable
C-32IW 75' (23m) IW Cable
C-33IW 100' (30m) IW Cable
— Repair End for IW Cable
C-44IW 50' (15m) IW Cable
C-45IW 75' (23m) IW Cable
— Repair End for 1 / " IW Cable
2
Model
No. Description
T-201 Straight Auger, 5" Long
T-202 Bulb Auger, 1 1 / " O.D.
8
T-203 Bulb Auger 7 / " O.D.
8
T-217 Drop Head, 4" Long
T-205 "C" Cutter 1 3 / "
8
T-206 Funnel Auger, 3" Long
T-207 Spiral Cutter, 1 1 / "
4
T-208 Spiral Cutter, 1 1 / "
2
T-209 Spiral Cutter, 2"
T-210 Spade Cutter, 1"
T-211 Spade Cutter, 1 3 / "
8
T-212 Spade Cutter, 1 3 / "
4
T-213 4-Blade Cutter, 1"
T-214 4-Blade Cutter, 1 3 / "
8
T-215 4-Blade Cutter, 1 3 / "
4
T-216 Chain Knocker, 2"
T-260 Tool Set (3/8"- K-400)
– T-202 Bulb Auger
– T-205 "C" Cutter
– T-211 Spade Cutter
– A-13 Pin Key
T-240 Tool Set (3/8"- K-400)
– T-202 Bulb Auger
– T-211 Spade Cutter
– A-13 Pin Key
Model
No. Description
— RIDGID Drain Cleaning
Gloves, Leather
— RIDGID Drain Cleaning
Gloves, PVC
A-13 Pin Key For 3 / " Cable
8
A-12 Pin Key For 1 / " Cable
2
— K-400 AUTOFEED Assembly
— K-400 Drum Assembly
— 3 / " x 1 / " Tool Adapter
8 2
— 3 / " x 1 / " Drop Head Adapter
8 2
— Coupling 1 / " Drop Head Tool
2
— Guide Hose
C-9 Trap Leader
— Cable Rust Inhibitor 1qt.
— Cable Rust Inhibitor 1gal.
Weight
lb. kg
18 8.2
26 11.8
34 15.4
0.5 0.2
27 12.2
39 17.7
0.6 0.3
Replacement
Blade(s)
—
—
—
—
97835
—
97840
97895
97900
97905
97825
92850
97795
97910
97915
98000
—
—
Weight
lb. kg
1 / 0.2
2
— —
2 0.9
10 4.5
1 / 0.2
2
1 / 0.2
2
1 / 0.2
2
2 1
5 2.2
2 1 / 1.2
2
8 1 / 3.8
2