HIKVISION DS-1200KI User Manual

HIKVISION DS-1200KI User Manual

Hide thumbs Also See for DS-1200KI:

Advertisement

DS-1200KI/DS-1006KI Keyboard
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for HIKVISION DS-1200KI

  • Page 1 DS-1200KI/DS-1006KI Keyboard User Manual...
  • Page 2 User Manual About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
  • Page 3 Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 DS-1200KI/1006KI Keyboard  User Manual Applicable Models This manual is applicable to DS-1200KI and DS-1006KI keyboard models. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
  • Page 5 DS-1200KI/1006KI Keyboard  User Manual  Keep all liquids away from the device.  Ensure environmental conditions meet factory specifications.  Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit.
  • Page 6: Table Of Contents

    DS-1200KI/1006KI Keyboard  User Manual TABLE OF CONTENTS Overview .......................... 1 Introduction ........................1 Features ..........................1 Appearance ........................1 Interfaces and Buttons ....................... 2 Functional Buttons ......................3 Getting Started ........................ 7 Activate Your Device ......................7 Login ........................... 7 System Menu ........................
  • Page 7 DS-1200KI/1006KI Keyboard  User Manual Version ..........................27 User Management ......................27 Serial Port Settings ......................27 Hardware .......................... 28 Time Settings ........................28 Maintenance ........................29 Specifications ......................... 30...
  • Page 8: Overview

     DS-1006KI keyboard: accessible to devices via RS-485/422 serial ports Appearance Except for the network port, DS-1200KI keyboards are the same as DS-1006KI keyboards in appearance. See Figure 1-1 for the appearance of the keyboard.
  • Page 9: Interfaces And Buttons

    DS-1200KI/1006KI Keyboard  User Manual Interfaces and Buttons See Figure 1-2 for the interfaces and joystick of the keyboard. See Figure 1-2 for the interfaces and joystick of the keyboard. Description of Rear Panel Item Description  In menu mode,...
  • Page 10: Functional Buttons

    DS-1200KI/1006KI Keyboard  User Manual directions. And the PTZ speed is depending on the joystick movement range. Rotate the joystick in clockwise/anti-clockwise directions to l to realize the zoom in/out control. Press the central button to capture picture.  In DVR operation mode, In preview mode, move to up/down or left/right to switch between screens (previous/next).
  • Page 11 DS-1200KI/1006KI Keyboard  User Manual keyboard is connected to DVR/NVR, the keyboard can be used to call the device menu and realize PTZ control through the virtual panel. For remote device menu operations, see 0 for the description of each button.
  • Page 12 DS-1200KI/1006KI Keyboard  User Manual PREV In the shortcut operation mode, switch to the previous camera ID or camera group ID. NEXT In the shortcut operation mode, switch to the next camera ID or camera group ID. Alphanumeric 0-9/A-Z Inputs numbers and characters in edit mode.
  • Page 13 DS-1200KI/1006KI Keyboard  User Manual Description of Buttons for Controlling DVR/NVR Item Button Description Common Confirm the selection and operation. Buttons In preview mode, start or stop previewing when the switch time is not set as 0. Exit the PTZ mode.
  • Page 14: Getting Started

    DS-1200KI/1006KI Keyboard  User Manual Getting Started Activate Your Device Purpose: For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. You can also activate the device via SADP as well.
  • Page 15 DS-1200KI/1006KI Keyboard  User Manual You must log in to the device before configuring the keyboard, and operating the menu and other functions. DS-1200KI keyboards support two ways of login: local login and remote login (by Web browser). DS-1006KI keyboards support local login only.
  • Page 16: System Menu

    DS-1200KI/1006KI Keyboard  User Manual System Menu Change Pswd Add User Version Edit User Network Delete User User RS-485 Serial Port RS-422 System Hardware RS-232 Time Upgrade Import Maintenance Export Menu Default Keyboard MAG by IP DVR by IP Shortcut...
  • Page 17: Web Configuration

    DS-1200KI/1006KI Keyboard  User Manual Web Configuration This section applies to DS-1200KI keyboards only. Device Mangement Add Devices Purpose: In Keyboard Operation mode, follow instructions in this section to add devices first before realizing the operation and control of the devices on the keyboard.
  • Page 18: Manage Input/Output Channels

    DS-1200KI/1006KI Keyboard  User Manual You can also click the Add SADP to add the online devices in the same network segment. Manage Input/Output Channels Purpose: You can manage the import and export of input channels in batch, input group and output channels via Web browser.
  • Page 19 DS-1200KI/1006KI Keyboard  User Manual Add Auto-Switch Groups Up to 16 input groups can be added, and up to 64 input channels can be added for each group.
  • Page 20: User And User-Related Device Management

    DS-1200KI/1006KI Keyboard  User Manual Manage Output Channel User and User-related Device Management The default user account of the device is admin (administrator), and the password is set when you start the device for the first time. The admin user account has the permission to add and delete operator accounts and configure user parameters, and add the related devices for the added users.
  • Page 21 DS-1200KI/1006KI Keyboard  User Manual STRONG PASSWORD RECOMMENDED–We highly recommend that you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend that you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
  • Page 22: Keyboard Operation

    This section describes how to control devices using the keyboard. On the keyboard, Press the MODE button on the panel to enter the operation for different devices. DS-1200KI keyboards support the following eight operation modes, while DS-1006KI keyboards support mode 4, 5, and 6.
  • Page 23: Keyboard Operation

    DS-1200KI/1006KI Keyboard  User Manual Operation Mode Description matrix via RS-232 port. Use the keyboard as terminal to connect to the iVMS Platform iVMS Platform and perform video wall and PTZ control. Use the keyboard as terminal to connect to a third-party platform Private VMS and support video operations through the platform.
  • Page 24: Call Presets/Patrols/Patterns

    DS-1200KI/1006KI Keyboard  User Manual  When you enter no device ID (DEV), the first decoder found is set for control by default. And if you enter no WIN ID, the window 01 is set to play the decoded video by default.
  • Page 25: Call Scenes

    DS-1200KI/1006KI Keyboard  User Manual  The preset/patrol/pattern must be pre-configured.  Whether PTZ functions are available or not depends on the capabilities of speed domes. If the speed domes do not support a PTZ function, the keyboard does not respond.
  • Page 26: Dvr By Ip

    DS-1200KI/1006KI Keyboard  User Manual For the initial use of MAG, you must use the configuration kits software to configure the input/output channel ID of the MAG. Please see the related user manual for details. The input/output channel ID is used for switching on the video wall or PTZ control during keyboard operation.
  • Page 27: Mag By Rs-422

    DS-1200KI/1006KI Keyboard  User Manual MAG by RS-422 The keyboard can connect with the matrix access gateway via RS-422 serial port, and realize the video wall control, PTZ control, etc. Before you start: Check the connection between the MAG and the Keyboard. Connect the T+ ad T- terminals of the keyboard's RS-422 serial port with the MAG's RS-422 serial port.
  • Page 28 DS-1200KI/1006KI Keyboard  User Manual See the following figure as an example for the network cable (568B). The pin 3 and pin 4 are colored in green-white and blue.
  • Page 29: Dvr By Rs-485

    DS-1200KI/1006KI Keyboard  User Manual  You can also press the Num + CAM buttons to select the input channel, and operate the PTZ control.  For the initial use of MAG, you must use the configuration kits software to configure the input/output channel ID of the MAG.
  • Page 30: To Analog Device

    DS-1200KI/1006KI Keyboard  User Manual The baud rate, protocol and other parameters of RS-485 of the keyboard must be configured to 9600, 8, 1 and none parity. To Analog Device Dome by RS-485 The keyboard can connect with the analog dome or PTZ unit via RS-485 serial port, and realize PTZ control.
  • Page 31: Analog Matrix By Rs-232

    DS-1200KI/1006KI Keyboard  User Manual SITE: 3 The address, baud rate, protocol and other parameters of RS-485 must be configured the same with the dome’s RS-485 parameters. Analog Matrix by RS-232 RS232 DEV: 1 MON: 2 CAM: 1...
  • Page 32: Ivms And Third-Party Platform

    DS-1200KI/1006KI Keyboard  User Manual iVMS and Third-Party Platform Access iVMS Platform by Network WALL: 2 MON: 2 CAM: 6  The parameters configurable through Web are also available when you log in to the keyboard and select Mode > iVMS Platform.
  • Page 33: Shortcut Operation

    DS-1200KI/1006KI Keyboard  User Manual MON: 5 WIN: 4 CAM: 2 The parameters configurable through Web are also available when you log in to the keyboard and select Mode > Private VMS. Shortcut Operation The device control via keyboard can be realized by shortcut operation.
  • Page 34: System Menu Configuration

    DS-1200KI/1006KI Keyboard  User Manual System Menu Configuration On the main menu after login, you can select System to check the version, and configure the system configuration, including network, user, RS-485, RS-422, hardware, time and maintenance. 1. Version 5. Hardware 2.
  • Page 35: Hardware

    DS-1200KI/1006KI Keyboard  User Manual Select Serial Port to enter the settings. You can configure the address bit (RS-485 only), baud rate, data bit, protocol, stop bit, parity, and copy all settings. When you set the Copy All to Yes for RS- 485 serial port, the current settings will be copied to the connection of all other RS-485 devices.
  • Page 36: Maintenance

    DS-1200KI/1006KI Keyboard  User Manual Maintenance Select Maintenance to enter the system maintenance settings interface. You can upgrade the device, import and export the configuration files, and recover the device to the factory default settings.  You should connect the U-flash disk to the keyboard before upgrading, and importing/exporting the files.
  • Page 37: Specifications

    DS-1200KI/1006KI Keyboard  User Manual Specifications Specification of DS-1200KI Model DS-1200KI LCD screen 128 × 64 pixel screen System Joystick 4-axis joystick Control mode Network, RS-232, RS-422, RS-485 Network interface 1 × 10/100 Mbps self-adaptive Ethernet interface External Serial interface 1 ×...
  • Page 38 DS-1200KI/1006KI Keyboard  User Manual UD11653N...

This manual is also suitable for:

Ds-1006ki

Table of Contents