HIKVISION DS-1100ki User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Keyboard
  5. DS-1100KI
  6. User manual

HIKVISION DS-1100ki User Manual

Network keyboard
Hide thumbs Also See for DS-1100ki:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Technical Manual

Network Keyboard

User Manual
UD.6L0203D1181A01

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-1100ki

Summary of Contents for HIKVISION DS-1100ki

  • Page 1: Network Keyboard

    Network Keyboard User Manual UD.6L0203D1181A01...
  • Page 2 Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.

  • Page 3: Regulatory Information

    DS-1100KI Network Keyboard User Manual Regulatory information FCC information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 4 DS-1100KI Network Keyboard User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 5 DS-1100KI Network Keyboard User Manual Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: • Ensure unit is placed in a well-ventilated, dust-free environment. • Keep all liquids away from the keyboard.

  • Page 6: Table Of Contents

    DS-1100KI Network Keyboard User Manual Table of Contents Chapter 1 Introduction ........................9 1.1 Overview ..........................9 1.2 Features ..........................9 1.3 Appearance ........................11 Chapter 2 Operation Guide ......................12 2.1 User Account ........................12 2.2 Indicators and Buttons ....................... 12 2.3 Button Operation .......................
  • Page 7 DS-1100KI Network Keyboard User Manual 4.1.3 Camera Settings ..................... 43 4.1.4 Alarm Settings ......................51 4.1.5 Exceptions ......................53 4.1.6 Maintenance ......................54 4.1.7 Stream Media Settings ................... 54 4.2 Decoder Settings ........................ 55 4.2.1 Network Settings ....................55 4.2.2 Serial Port Settings ....................56 4.2.3 Output Settings ......................
  • Page 8 DS-1100KI Network Keyboard User Manual 5.3.6 Setting a Tour ......................78 5.3.7 Calling a Tour ......................79 5.3.8 Setting a Group Tour ....................80 5.3.9 Calling a Group Tour ....................80 5.3.10 Operating Instant Playback ................... 81 5.3.11 Operating Video Wall Switch................. 82 5.3.12 Operating Scene Switch ..................
  • Page 9 DS-1100KI Network Keyboard User Manual 7.1.4 Device Management ..................... 120 7.1.5 Import/Export Channel List .................. 122 7.1.6 Maintenance ......................122 7.2 Configuring by Operator ....................124 7.2.1 Device List ......................124 7.2.2 Input Settings ......................125 7.2.3 Output List ......................127 7.2.4 Password Modification ..................

  • Page 10: Chapter 1 Introduction

    1.1 Overview DS-1100KI Network Keyboard can be used to control the camera/speed dome, display of decoded video on video wall, control of matrix, as well as support 1 channel of video view at up to 1080p resolution. Designed with touch screen, it is easy to operate and configure settings.
  • Page 11 DS-1100KI Network Keyboard User Manual Display of Decoded Video on Monitor  Display of decoded camera on selected window;  Display of decoded camera group on selected window;  Sequence display of decoded camera group on monitor;  Sequence display of decoded camera group on monitor group;...

  • Page 12: Appearance

    DS-1100KI Network Keyboard User Manual 1.3 Appearance Front View: Figure 1. 1 Front View Table 1. 1 Description of panel Serial No. Description Serial No. Description Record playback Functional buttons Numeric buttons PTZ control area Interface Description: Figure 1. 2 Interface Table 1.

  • Page 13: Chapter 2 Operation Guide

    DS-1100KI Network Keyboard User Manual Chapter 2 Operation Guide 2.1 User Account The keyboard user account is classified to two types: the admin and the operator. The admin user is authorized with the following operation permissions: 1. Add a maximum of 3 operators;...
  • Page 14 DS-1100KI Network Keyboard User Manual Reserved ALARM Reserved Functional Buttons: Figure 2. 3 Functional Buttons Table 2. 2 Functional Buttons’ Description MON-G CAM-G Select monitor Select window Select camera Select monitor group Select camera group MULT TOUR GROUP Multi-division Call...
  • Page 15 DS-1100KI Network Keyboard User Manual Figure 2. 4 Numeric Buttons 4-axis Joystick: Use the joystick to realize pan and tilt movement at 8 directions. The 4-axis joystick can be used to control the zoom; and the central button used as Enter button and to realize picture capture as well.

  • Page 16: Button Operation

    DS-1100KI Network Keyboard User Manual Figure 2. 6 Playback Control Table 2. 3 Playback Buttons Backward 5min Stop Record Play/Pause Previous File Next File 2.3 Button Operation 2.3.1 Operating Video Wall Display Table 2. 4 Button Description Button Description Example...

  • Page 17: Ptz Control Buttons

    DS-1100KI Network Keyboard User Manual TOUR SET+Num+TOUR: set the tour. Press the SET+1+TOUR buttons to set the tour 1. Num+TOUR: call the defined tour. Press the 1+TOUR buttons to call the pre-defined tour 1. GROUP SET+Num+GROUP: set the group. Press the SET+1+GROUP buttons to set the group Num+GROUP: call the defined group.

  • Page 18: Input Method Shift

    DS-1100KI Network Keyboard User Manual 2.4 Input Method Shift Click the tab on the soft keyboard to enter the interface for inputting the English letters, and the can be used to switch the uppercase/lowercase. Figure 2. 7 Soft Keyboard (1) Click the tab on the soft keyboard to enter the interface for inputting the numerals.

  • Page 19: Quick Configuration Guide

    DS-1100KI Network Keyboard User Manual Admin: For the first time to operate the keyboard, you should configure the keyboard parameters in Keyboard Configuration menu, add device and operator, and then link the added device to assigned operator. Operator: The operator is allowed to operate local live view, remote configuration of encoder/decoder parameters, display of decoded video on monitor, local playback, PTZ control, AUX functions, etc.
  • Page 20 DS-1100KI Network Keyboard User Manual STRONG PASSWORD RECOMMENDED–We highly recommend that you create a strong password of STRONG PASSWORD RECOMMENDED your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. We recommend that you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
  • Page 21 DS-1100KI Network Keyboard User Manual Figure 2. 14 Adding Device Return to the Device-Device List interface, and the successfully added device is shown on the list. Click Return to back to the main interface. Figure 2. 15 Device-Device List Click User on the main interface to enter the User-User List interface.
  • Page 22 DS-1100KI Network Keyboard User Manual Figure 2. 17 User-Add User 11. Return to the User List interface, and click of the selected user to enter the User-Device interface. Figure 2. 18 User-Device 12. Click Add Device to enter the User-Add Device interface. Select the device by clicking the checkbox, and click Add to add the device for the current user.

  • Page 23: Quick Operation

    DS-1100KI Network Keyboard User Manual Figure 2. 20 User-User List 2.7 Quick Operation Multi-division Display The Operator user is allowed to select different multi-division display modes for the selected output channel. Currently, 1/4/9/16-division display modes are configurable. Steps: 1. Press the Num + MON keys to select the monitor.
  • Page 24 DS-1100KI Network Keyboard User Manual Figure 2. 22 Shortcuts...

  • Page 25: Chapter 3 Local Keyboard Configuration By Admin

    DS-1100KI Network Keyboard User Manual Chapter 3 Local Keyboard Configuration by Admin You can configure the keyboard by locally, WEB page or by the configuration tool. This chapter introduces the local keyboard configuration. 3.1 Login Steps: Click the Keyboard icon on the startup interface.

  • Page 26: Changing Default Password

    DS-1100KI Network Keyboard User Manual If the admin inputs wrong password for 7 times, the password would be locked. If the operator inputs wrong password for 5 times, the password would be locked. The times of inputting wrong password by two users in 3 minutes will be overlapped.

  • Page 27: Keyboard Management

    DS-1100KI Network Keyboard User Manual If the password you set is weak, the message box “Weak password” will pop out, but you are able to finish the password settings. Figure 3. 5 Message Boxes Click OK to finish the password changing.

  • Page 28: Configuring Hardware Settings

    DS-1100KI Network Keyboard User Manual Figure 3. 7 Network Settings 3.3.3 Configuring Hardware Settings Sound Effect/Alarm Sound/Key Light: Click the corresponding checkbox to to enable the function, or remain it as to disable the function. The key light defaults to be on. Alarm will be sounded when the network is disconnected or the IP is conflicting.

  • Page 29: Configuring Time Settings

    DS-1100KI Network Keyboard User Manual 3.3.4 Configuring Time Settings Date: Click to select the date from the calendar. Time: Click to decrease or increase the time value. Click Apply to save the settings. Figure 3. 9 Time Settings 3.3.5 Selecting Language Language: Click to select English as the system language.

  • Page 30: Upgrading Device

    DS-1100KI Network Keyboard User Manual Figure 3. 11 Screen Calibration (1) Use the touch pen to click the three spots marked as “+” by following the hints. needs to be clicked. The system will pop up the hint “Screen Calibration completed”, click OK to finish the operation.

  • Page 31: Device Management

    DS-1100KI Network Keyboard User Manual If the upgrading is failed, the corresponding error message box will pop up. Attention Figure 3. 14 When the upgrading is successful, the keyboard restarts automatically to complete the upgrade. Upgrade by USB-flash Disk Steps: Insert the U-flash disk to the USB interface and then click USB Upgrade to enter the USB upgrade interface.

  • Page 32: Adding A Device

    DS-1100KI Network Keyboard User Manual Table 3. 1 Device-Device List When adding B20 MVC/multi-screen controller/64-S decoder/64-T decoder, a default segment will be specified according to the adding sequence. The segment is the integral multiple of 1000. 3.4.1 Adding a Device...
  • Page 33 DS-1100KI Network Keyboard User Manual Figure 3. 17 Attention Message boxes like “Risky password”, “Weak password”, “Middle password” and “Strong password” pops up as prompts, and you are allowed to finish the device adding. Click Add to add it to the system.

  • Page 34: Editing/Deleting Device

    DS-1100KI Network Keyboard User Manual 3.4.2 Editing/Deleting Device Edit Device On the Device-Device List interface, click of the device from the list to be edited and enter the Device-Edit Device interface. Steps: You are allowed to edit the device name, port, user name and password. If the password is not strong enough, a message box “Risky password”...

  • Page 35: User Management

    DS-1100KI Network Keyboard User Manual Figure 3. 21 Delete Device 3.5 User Management Click User on the admin main interface to enter the User-User List interface. Figure 3. 22 User-User List 3.5.1 Adding an User Steps: Click Add User to enter the User-User List interface.

  • Page 36: Setting The Related Device

    DS-1100KI Network Keyboard User Manual Figure 3. 24 Attention Message boxes like “Weak password”, “Middle password” and “Strong password” pop out as well, when setting corresponding passwords, and you are allowed to finish user adding. Click Add to finish the user adding.
  • Page 37 DS-1100KI Network Keyboard User Manual Figure 3. 26 Adding Device The successfully added device is listed on the User-Device interface. Figure 3. 27 Device List After having configured the above settings, click Logout on the admin main interface, the message box “Logout now?”...

  • Page 38: Editing User Password/Deleting User

    DS-1100KI Network Keyboard User Manual 3.5.3 Editing User Password/Deleting User Edit User Password: On the User-User List interface, you can click to change the password of the selected user. Figure 3. 29 Changing Password Input new password and verify the password. If the password is not strong enough, a message box “Risky password”...

  • Page 39: Importing/Exporting Configuration File

    DS-1100KI Network Keyboard User Manual 3.5.4 Importing/Exporting Configuration File Purpose: The configuration files of the device can be exported to local device for backup; and the configuration files of one device can be imported to multiple devices if they are to be configured with the same parameters.

  • Page 40: Default

    DS-1100KI Network Keyboard User Manual Figure 3. 33 Exporting Configuration File If the imported configuration file is incorrect, the message box “Importing file failed: file type mismatched” will pop up. 3.6 Default Purpose: There are two types of restoring default supported: Simple and Complete.

  • Page 41: Shutdown

    DS-1100KI Network Keyboard User Manual Click Yes to confirm the reboot, or No to cancel the operation. 3.9 Shutdown Click Shutdown on the admin main interface, the message box “Shut down now?” will pop up. Click Yes to confirm the shutdown, or No to cancel the operation.

  • Page 42: Chapter 4 Local Keyboard Configuration By Operator

    DS-1100KI Network Keyboard User Manual Chapter 4 Local Keyboard Configuration by Operator Steps: On the User Login interface, select the user name (operator) and enter password. If needed, check the checkbox of Remember Password to save the login password for future use.

  • Page 43: Encoder Settings

    DS-1100KI Network Keyboard User Manual Figure 4. 3 Device List 4.1 Encoder Settings Click of an encoder on the Device List interface and enter its remote settings interface. You can configure the settings for network, RS-232/RS-485 serial port, camera, alarm, exception, stream media, etc.

  • Page 44: Serial Port Settings

    DS-1100KI Network Keyboard User Manual General Settings: Configure the NIC type, IP address, port, gateway, subnet mask, MAC address, DNS server address, and HTTP port of the current encoder device. PPPoE: Configure the user name and password of PPPoE settings.
  • Page 45 DS-1100KI Network Keyboard User Manual Figure 4. 8 Camera Settings Configuring Video Display On the Video Display interface, you can select the camera name for configuration, edit the camera name, select display or not display of the name/date /week, set the date/time format and OSD display. You can also copy the current settings to other camera (s).
  • Page 46 DS-1100KI Network Keyboard User Manual Configuring Record Settings Configuring Advanced Settings On the Record Settings interface, select the camera for configuration. Click Advanced to enter the Advanced Settings interface where you can configure the pre-record, post-record, expired time, redundant record, record audio, etc.
  • Page 47 DS-1100KI Network Keyboard User Manual To schedule an all-day recording, click the checkbox of the All Day item. Select the recording type for the selected day to Continuous, Motion Detection, Alarm, Motion / Alarm or Motion & Alarm. Configure the period for each day and select the recording type for the selected period.
  • Page 48 DS-1100KI Network Keyboard User Manual Figure 4. 14 Area Settings Click Start Drawing, and then use the mouse to click two points on the live view screen to draw area for motion detection. To clear the motion detection area (s), click Clear All.
  • Page 49 DS-1100KI Network Keyboard User Manual Configuring Video Loss Detection Detect the video loss of a camera and take alarm response action(s). Steps: On the Video Loss interface, click Set beside Video Loss to enter the Video Loss Detection interface. Figure 4. 17 Video Loss Select the camera for configuring video loss detection.
  • Page 50 DS-1100KI Network Keyboard User Manual After having configured the above setting and if you want to configure the other cameras with the same settings, choose the camera and click Copy. You can also select All to copy the current settings to all cameras.
  • Page 51 DS-1100KI Network Keyboard User Manual Figure 4. 21 Setting Privacy Mask Select the camera for configuring privacy mask. Click the checkbox of Enable item to enable privacy mask. Click the Set button beside Area Settings to set privacy mask area. Please refer to the settings of motion detection area.

  • Page 52: Alarm Settings

    DS-1100KI Network Keyboard User Manual Configure the Camera No., Registration Mode (IP address/domain name), IP address/ Domain name, Port, User Name, Password, Channel No. and Factory (protocol type) to add the IP camera. Click OK to save the settings. On the Channel List interface, click Apply to finish the adding of the IP camera.
  • Page 53 DS-1100KI Network Keyboard User Manual Figure 4. 26 Alarm Input Settings Set the handling action for the selected alarm input by clicking the checkbox of Handling Alarm. Configure the Arming Schedule and Linkage Action to set up its alarm response actions, as well as triggered camera and PTZ linkage (calling defined preset / patrol / pattern).

  • Page 54: Exceptions

    DS-1100KI Network Keyboard User Manual Set the Dwell Time (duration) for the alarm output. Configure the Arming Schedule of the alarm output. After having configured the above setting and if you want to configure the other cameras with the same settings, choose the camera and click Copy. You can also select All to copy the current settings to all cameras.

  • Page 55: Maintenance

    DS-1100KI Network Keyboard User Manual Select the handling method (s) by clicking the checkbox (s) for the selected exception type. Audible Warning: Audible beep when an alarm is detected. Notify Surveillance Center: Send an exception or alarm signal to remote alarm host when an event occurs.

  • Page 56: Decoder Settings

    DS-1100KI Network Keyboard User Manual Figure 4. 32 Stream Media Settins Enable the Stream Media by checking the checkbox. Input the IP address and port of the server. The Server IP refers to the IP address of the PC on which the stream media software is running.

  • Page 57: Serial Port Settings

    DS-1100KI Network Keyboard User Manual Figure 4. 34 Network Settings Please refer to the Network Settings of the Encoder for details. 4.2.2 Serial Port Settings Click Serial on the remote settings interface to enter the Serial Port Settings interface. Figure 4. 35 Serial Port Settings You can set the RS232 port and RS485 parameters.

  • Page 58: Video Wall

    DS-1100KI Network Keyboard User Manual Click Output on the remote settings interface to enter the Output Settings interface. Figure 4. 37 Output Settings Select the display channel. Enable audio and configure it for a window if required. Set the video format and resolution of the decoded video output.

  • Page 59: Decoding Status

    DS-1100KI Network Keyboard User Manual 4.2.5 Decoding Status Click Decoding Status on the remote settings interface to enter the Decoding Status interface. You can view the working status of each decoding channel, including the decoding state, stream type, package mode, video/audio frame rate, etc.

  • Page 60: Starting Local Live View

    DS-1100KI Network Keyboard User Manual Search button. The camera name shown in the Camera Name is obtained from the corresponding device. Figure 4. 41 Input Settings Interface 4.3.1 Starting Local Live View Steps: Select a camera from the input list and click the icon to start the local live view.

  • Page 61: Editing A Camera

    DS-1100KI Network Keyboard User Manual Figure 4. 43 Channel-Zero Select an encoding device from the list and click the icon to enter the local live view by the channel-zero. The channel-zero must be supported by the connected encoding device and has been enabled.

  • Page 62: Setting Input Group

    DS-1100KI Network Keyboard User Manual 4.3.4 Setting Input Group Steps: Click Input Group to enter the Input Settings-Input Group interface. Click to select the group No. from the drop-down menu, set the cycle time for the group and click the Save button.

  • Page 63: Playback On Monitor

    DS-1100KI Network Keyboard User Manual Figure 4. 47 Output List 4.4.1 Playback on Monitor Select an output channel from the output list and click the icon to enter the Playback interface. Before operating the playback, you must configure the output settings first. Please refer to 4.2.3 Output Settings.
  • Page 64 DS-1100KI Network Keyboard User Manual Click Search to search the matched video files. The searching results can be viewed on the Playback File List interface. Figure 4. 49 Playback File List Select the file for playback from the list and click Playback to play back the video file.

  • Page 65: Editing An Output Channel

    DS-1100KI Network Keyboard User Manual 4.4.2 Editing an Output Channel Select an output channel from the Output Settings-Output List interface, and click to edit the output No.. The Output No. should be set uniquely from 1 to 99999999. Figure 4. 51 MON: 1 Playback Interface (2) 4.4.3 Setting Output Group...

  • Page 66: Setting Video Wall/Scene

    DS-1100KI Network Keyboard User Manual Select the outputs from the list to be added to the group, and then click Add to finish the setting. Click Finish to return to the Output Group interface, where you can view the successfully added output channels for the current group.
  • Page 67 DS-1100KI Network Keyboard User Manual keys on the keyboard to enter the text box below. Finally, click Add to add the current macro command.  Up to 128 macro commands can be added.  Max. 6 numerals can be included in a macro command.

  • Page 68: Playback

    DS-1100KI Network Keyboard User Manual Figure 4. 58 Macro List Deleting Macro You can click to delete the added macro command. 4.6 Playback The video files stored in the encoding device can be played back through the related decoder. Three playback modes are available: playback by USB file, playback by time and playback by file.

  • Page 69: Playback By File

    DS-1100KI Network Keyboard User Manual Figure 4. 60 Playback by USB File Select the video file from the USB disk for playback. Click Playback to play the selected video file. Figure 4. 61 Playback 4.6.2 Playback by File Steps: Click the By File tab on the Local Playback interface to enter the Playback by File interface.

  • Page 70: Playback By Time

    DS-1100KI Network Keyboard User Manual Click Search to search the matched video files. (1) The searching results can be viewed on the Playback File List interface. Figure 4. 63 Playback File List (2) Select the file for playback from the list and click Playback to play back the video file.

  • Page 71: Password Settings

    DS-1100KI Network Keyboard User Manual Figure 4. 65 Advanced Settings 4.7.1 Password Settings Click Password on the Advanced Settings interface to enter the Password Settings interface. It is allowed to edit the password for the current login user. Enter the current password and new password, and then click Apply to finish the password modification.

  • Page 72: Ftp Settings

    DS-1100KI Network Keyboard User Manual Figure 4. 67 AUX Key Settings 4.7.3 FTP Settings The video files or captured pictures can be uploaded to FTP server. For detailed information of FTP settings, refer to Appendix 2. Steps: Click FTP Setting on the left navigation bar to enter the FTP settings interface.

  • Page 73: Performance Settings

    DS-1100KI Network Keyboard User Manual 4.7.4 Performance Settings Click Performance on the Advanced Settings interface to enter the network performance. It allows you to set the network performance of local live view on keyboard. Five levels are selectable. Figure 4. 69 Performance Settings 4.8 Logout...

  • Page 74: Chapter 5 Keyboard Operation

    DS-1100KI Network Keyboard User Manual Chapter 5 Keyboard Operation 5.1 Shortcut Operation The operating user must log in the keyboard to realize all shortcut operations (except LOCK). Shortcut Operation: Press the Num keys on the keyboard to enter the shortcuts operation interface.

  • Page 75: Display Of Decoded Video On Monitor

    DS-1100KI Network Keyboard User Manual Figure 5. 2 Local Live view Press the ESC key on the keyboard to enter full-screen preview mode. Figure 5. 3 Full Screen Preview Mode  Up to 1080P resolution is supported for local live view.

  • Page 76: Setting Camera To Monitor

    DS-1100KI Network Keyboard User Manual Error Warning: If no output channel No. or multi-division number is inputted, “Input the number first.” will appear. If pressing the Num + MULT keys directly without pressing the Num + MON keys first, “Select a MONITOR first.”...

  • Page 77: Setting Camera Group To Monitor

    DS-1100KI Network Keyboard User Manual Figure 5. 5 Setting Camera to Monitor The value of the monitor No. is the sum of the device segment and the window No. if B20 MVC/multi-screen controller/64-S decoder/64-T decoder is connected. E.g. The segment of B20 MVC is 1000, and the window No.

  • Page 78: Setting Camera Group To Window

    DS-1100KI Network Keyboard User Manual Figure 5. 6 Setting Camera Group to Monitor  In the local live view mode when you input 0+MON keys, the multi-division display mode is not supported. When you press the 0+CAM keys, it will stop the dynamic decoding of the current window.

  • Page 79: Setting Camera Group To Monitor Group

    DS-1100KI Network Keyboard User Manual Corresponding error message appears on the lower-left corner of the screen when you perform wrong operation. 5.3.5 Setting Camera Group to Monitor Group The selected camera group signal can be outputted and displayed by the decoding channel on the selected monitor group.

  • Page 80: Calling A Tour

    DS-1100KI Network Keyboard User Manual Repeat Step 3 to set other cameras. Press the SET key to finish the tour settings. The tour settings will not be saved after the keyboard is rebooted. Figure 5. 9 Setting a Tour Up to 8 tours can be supported currently.

  • Page 81: Setting A Group Tour

    DS-1100KI Network Keyboard User Manual 5.3.8 Setting a Group Tour Multiple camera groups can be displayed on the specified monitors in tour respectively. Each user account is allowed to set up to 8 group tours, and each group can include 8 camera groups to specified monitors.

  • Page 82: Operating Instant Playback

    DS-1100KI Network Keyboard User Manual Figure 5. 12 Calling a Group Tour 5.3.10 Operating Instant Playback The recording files of the previous 5 seconds can be played back via the keyboard instantly. Steps: 1. Press the Num + MON keys to select the monitor.

  • Page 83: Operating Video Wall Switch

    DS-1100KI Network Keyboard User Manual 5.3.11 Operating Video Wall Switch The Network Keyboard adds the decoder (e.g. DS-6400HD-T) and configures the video wall switch on the client software.. Steps: Num+MON, Num+CAM to switch the video on the video wall. Figure 5. 14 Operating Video Wall Switch The Num in “Num+MON”...

  • Page 84: Ptz Control

    DS-1100KI Network Keyboard User Manual 5.4 PTZ Control 5.4.1 PTZ Control Function If the camera connected to the keyboard supports PTZ function, you are allowed to operate the LIGHT/FOCUS/IRIS/ZOOM/WIPER buttons to realize PTZ control. Two operation methods can be used to realize PTZ control: Method 1: Press the Num + MON keys to select the monitor.

  • Page 85: Calling A Preset

    DS-1100KI Network Keyboard User Manual Corresponding error message will appear on the screen when you perform wrong operation. • Setting a Preset by Input Channel Steps: Press the Num + CAM keys to select the input channel. Operate the joystick to move PTZ to the desired position.

  • Page 86: Setting A Patrol

    DS-1100KI Network Keyboard User Manual Figure 5. 18 Calling a Preset Corresponding error message will appear on the screen when you perform wrong operation. • Calling a Preset by Input Channel Steps: Press the Num + CAM keys to select the input channel.
  • Page 87 DS-1100KI Network Keyboard User Manual Press the Num + WIN keys to select the display window. Press the SET key to enter the settings interface. Press the Num + PATROL keys to enter the patrol settings interface. Input Num and press the ENTER key to set the preset number, stop time and speed respectively.

  • Page 88: Calling A Patrol

    DS-1100KI Network Keyboard User Manual 5.4.5 Calling a Patrol Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera. Press the PATROL key on the keyboard to call the programmed patrol. You are also allowed to directly select the camera and then press the PATROL key to realize patrol callup.

  • Page 89: Setting A Pattern

    DS-1100KI Network Keyboard User Manual Corresponding error message will appear on the screen when you perform wrong operation. 5.4.6 Setting a Pattern Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera. Press the SET key on the keyboard and then press PATTERN key to enter the pattern settings interface.

  • Page 90: Calling A Pattern

    DS-1100KI Network Keyboard User Manual Corresponding error message will appear on the screen when you perform wrong operation. 5.4.7 Calling a Pattern Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera. Press the PATTERN key on the keyboard to call the programmed pattern. You are also allowed to directly select the camera by inputting Num + CAM keys and then press the PATTERN key to realize pattern callup.

  • Page 91: Calling Pan Scan

    DS-1100KI Network Keyboard User Manual Corresponding error message will appear on the screen when you perform wrong operation. 5.4.8 Calling Pan Scan Select the output monitor or window and the keyboard is capable of automatically connecting with its corresponding camera. Press the PATTERN key on the keyboard to call the pan-scan. You are also allowed to directly select the camera by inputting Num + CAM keys and then press the PATTERN key to realize pan-scan callup.

  • Page 92: Aux Functions

    DS-1100KI Network Keyboard User Manual 5.5 Aux Functions The keyboard is designed with AUX1 and AUX2 keys on its panel. You are allowed to configure Aux function for AUX1/AUX2 key on the operator user interface. By default settings, the AUX1 is selected to two-way audio and the AUX2 to picture capture function.

  • Page 93: Recording

    DS-1100KI Network Keyboard User Manual U-flash disk. When the current window is configured with multiple channels for display (in cycle view mode), the error message will appear on the screen as well. 5.5.3 Recording The video from the camera can be recorded and saved in the local U-flash disk or uploaded to FTP server as well.

  • Page 94: 256-Ch Nvr Access And Operation

    DS-1100KI Network Keyboard User Manual 5.6 256-ch NVR Access and Operatio Select admin on the login interface and then input the admin password to enter the admin main interface. Admin Main interface Figure 5. 28 Click Device to enter the device interface and add the NVR.
  • Page 95 DS-1100KI Network Keyboard User Manual On the User-User List interface, click (Login Operator) to directly switch to the Operator user login interface. Click Input to view all the NVR’s IP cameras. Figure 5. 31 Input List Click Output to view all the outputs.
  • Page 96 DS-1100KI Network Keyboard User Manual Num =0 means cancelling the image display of the window. Clicking the window area directly can also select the window. Num + MON, Num + WIN and Num + CAM keys are available. PTZ control can be realized via the joystick.

  • Page 97: Chapter 6 Server Operation

    DS-1100KI Network Keyboard User Manual Chapter 6 Server Operation 6.1 Control of MVC Through the DS-1100KI keyboard, you can configure and control the Multi-function Video Center (MVC). 6.1.1 Login Steps: Click the Server icon on the startup interface to enter the Server Login interface.
  • Page 98 DS-1100KI Network Keyboard User Manual interface. Figure 6. 3 MVC List The device types in the MVC system are shown as follows: M_ENC: Encoding module M_DEC: Decoding module M_CODE: Code distribution module M_CAS_IN: Input cascading module M_CAS_OUT: Output cascading module...

  • Page 99: Camera List

    DS-1100KI Network Keyboard User Manual  The range from the start IP to end IP must be larger than the number of the functional modules.  When the NAT function of the system is enabled, it is not allowed to operate the batch edit.
  • Page 100 DS-1100KI Network Keyboard User Manual Setting Input Group Steps: Click Input Group to enter the MVC Input Group interface. Click to select the group No. from the drop-down menu. Set the Cycle Time (1-65535s) for the current group. The Cycle Time refers to the dwell time defined for each camera in this group.

  • Page 101: Monitor List

    DS-1100KI Network Keyboard User Manual Figure 6. 9 MVC Input Group interface Click Save to save the settings. 6.1.4 Monitor List Viewing Monitor List Steps: Click the Monitor tab to view the information of all monitors connected to the current MVC system, including the monitor ID, output type, IP address and port.
  • Page 102 DS-1100KI Network Keyboard User Manual Configuring monitor settings: Decoding Ability: Set the parameters according to the resolution of the front-end device. If the maximum resolution of the front-end devices connected is 720P, then the Maximum Ability should be set as 720P.

  • Page 103: Displaying Video On Monitor

    DS-1100KI Network Keyboard User Manual Figure 6. 14 Add Output interface Select the outputs from the list to be added to the group, and then click Add to finish the setting. Click OK to return to the MVC Output Group interface, where you can view the successfully added output channels for the current group.

  • Page 104: Scene Settings

    DS-1100KI Network Keyboard User Manual Figure 6. 16 Displaying Video on Monitor 6.1.5 Scene Settings Steps: Click the Scene tab to enter the Scene Settings interface. Figure 6. 17 Scene Settings interface Click on the list to switch to the selected scene.

  • Page 105: Screen Settings

    DS-1100KI Network Keyboard User Manual Figure 6. 19 Shortcuts Operation Interface Press the Num + WIN keys or click on the window to select the window No. Press the Num + CAM keys to select the camera No. of which the video is displayed on the selected window.
  • Page 106 DS-1100KI Network Keyboard User Manual Select the screen No.. Enable the screen display by clicking the checkbox. Select the screen mode, e.g., 2 x 2. Set the main screen No. which refers to the output for image processing. Configure the sub-window settings.
  • Page 107 DS-1100KI Network Keyboard User Manual Press the Num + WIN keys to select the roaming layer of the screen. Press the Num + CAM keys to select the input camera. Example: You can press the “1+AUX1, 2+WIN, 3+CAM” keys to display the video signal from camera 3 on the roaming window 2 of multi-screen 1.

  • Page 108: Control Of Analog Matrix

    DS-1100KI Network Keyboard User Manual Figure 6. 25 Setting Background Picture Interface (1) Select the picture file from the directory and click the Upload button to select the layer for the picture. Figure 6. 26 Setting Background Picture Interface (2) Select the layer from the drop-down list.

  • Page 109: Configuring Rs-232 Parameters

    DS-1100KI Network Keyboard User Manual Steps: Select the login mode to Analog Matrix on the Server Login interface. Figure 6. 28 Server Login Interface Enter the number of video inputs in the Input Number field. Enter the number of video outputs in the Output Number field.

  • Page 110: Operating Analog Matrix

    DS-1100KI Network Keyboard User Manual 6.2.3 Operating Analog Matrix With successful RS-232 communication between the keyboard and the analog matrix, you can switch the video input to be displayed on the monitor by following the steps below. Steps: Press the Num + MON keys to select the output channel of the analog matrix.

  • Page 111: Operating Ptz Control

    DS-1100KI Network Keyboard User Manual Click Apply to save the settings. You can click the Copy All To button to copy the current RS-485 parameters to other PTZ addresses. 6.2.5 Operating PTZ Control Operating PTZ Movement Steps: Press the Num + CAM keys to select the connected analog dome or pan/tilt unit.
  • Page 112 DS-1100KI Network Keyboard User Manual Figure 6. 33 Calling a Preset Setting/Calling a Patrol • Setting a Patrol Steps: Input the Num + CAM keys to select the connected analog dome or pan/tilt unit. Press the SET key to enter the settings interface.
  • Page 113 DS-1100KI Network Keyboard User Manual Figure 6. 35 Calling a Patrol Setting/Calling a Pattern • Setting a Pattern Steps: Input the Num + CAM keys to select the connected analog dome or pan/tilt unit. Press the SET key to enter the settings interface.

  • Page 114: Access By Ivms Platform

    DS-1100KI Network Keyboard User Manual 6.3 Access by iVMS Platform DS-1100KI Network Keyboard can be accessed by iVMS-5200. Please make proper configuration on the iVMS platform before connecting the keyboard to the iVMS server. Please refer to the user manual of corresponding iVMS platform for instructions.

  • Page 115: Managing Input Channel

    DS-1100KI Network Keyboard User Manual Figure 6. 40 TV-Screen Group Interface Log in to the iVMS platform, and click Logical View->Camera to enter the following page: Figure 6. 41 Camera List Log in the iVMS 5200 and click Live View to view the screen layout: Figure 6.
  • Page 116 DS-1100KI Network Keyboard User Manual Figure 6. 43 Control Center Unit List You can modify the index No. of the input channel via the iVMS platform. Click Logical View->Camera to enter the following page to view the list of connected input channels: Figure 6.

  • Page 117: Displaying Video On Monitor

    DS-1100KI Network Keyboard User Manual 6.3.3 Displaying Video on Monitor You can follow the steps below to view the video from a camera on the selected screen. Steps: Press the Num + MON keys on the keyboard to select the screen.

  • Page 118: Chapter 7 Keyboard Configuration By Web Server

    DS-1100KI Network Keyboard User Manual Chapter 7 Keyboard Configuration by WEB Server You are also allowed to configure the keyboard parameters by WEB server. 7.1 Configuring by Admin 7.1.1 Login Open WEB browser, input the IP address of the keyboard (e.g., http://172.6.24.64) and click Enter.

  • Page 119: Keyboard Management

    DS-1100KI Network Keyboard User Manual 7.1.2 Keyboard Management Click Keyboard on the left navigation bar to enter the Keyboard management interface: Figure 7. 3 Keyboard Management On this interface, you can configure the hardware and network parameters of the keyboard.
  • Page 120 DS-1100KI Network Keyboard User Manual Figure 7. 5 Adding a User Editing a User Select a user from the list and click the icon to enter the following interface to change its password. Figure 7. 6 Editing a User Deleting a User Select a user from the list and click the icon.

  • Page 121: Device Management

    DS-1100KI Network Keyboard User Manual On this interface, you can add device for the current user. Click Add to enter the User-Add Device interface on which it displays all devices already added to the keyboard by admin. Figure 7. 9 User Device (1) Select the device (s) from the list and then click Add button to finish the adding of device (s) for the current user.
  • Page 122 DS-1100KI Network Keyboard User Manual Figure 7. 11 Device management interface On this interface, you can add, edit or delete the device. Adding a Device Click Add to enter the Add User interface. Input the name, IP, port and login user name/password of the device to add.

  • Page 123: Import/Export Channel List

    DS-1100KI Network Keyboard User Manual 7.1.5 Import/Export Channel List Click Import/Export Channel List to import the files on the input channel list which has been configured well via the computer or export the output channel information of the keyboard. Steps: Click Browse to select the file to be imported.
  • Page 124 DS-1100KI Network Keyboard User Manual Select the default type on your demand, Complete and Simple are selectable. Please refer to 3.6 Default for the details of two default types. Import/Export Configuration File Click the Import/Export Config. File on the left navigation bar to enter the configuration file management interface.

  • Page 125: Configuring By Operator

    DS-1100KI Network Keyboard User Manual 7.2 Configuring by Operator 7.2.1 Device List On the login interface, input the user name and password of operator, and then click OK to log into the keyboard. Figure 7. 19 Logging in by Web After successful login, you enter the Device List interface: Figure 7.

  • Page 126: Input Settings

    DS-1100KI Network Keyboard User Manual 7.2.2 Input Settings Click Input Settings on the left navigation bar to enter the Input List interface: Figure 7. 22 Input Settings Editing a Camera By selecting a camera from the list and clicking the icon, you are allowed to edit its name, No., protocol and...
  • Page 127 DS-1100KI Network Keyboard User Manual Figure 7. 25 Adding Camera Return to the Input Group interface, and you can view the successfully added cameras for the current group. Figure 7. 26 Input Group interface Viewing Channel-zero Click the Channel-zero button to show the list of devices which support the Channel-zero function.

  • Page 128: Output List

    DS-1100KI Network Keyboard User Manual 7.2.3 Output List Click Output Settings on the left navigation bar to enter the Output List interface: Figure 7. 28 Output Settings Editing an Output Channel By selecting an output channel from the list and clicking the icon, you are allowed to edit its output No..

  • Page 129: Password Modification

    DS-1100KI Network Keyboard User Manual Click the icon to edit the video wall / scene No.. Video wall list: It mainly aims at DS-6400HD-T series decoder. The video wall on the list is the one configured well via client software or network keyboard.

  • Page 130: Performance Settings

    DS-1100KI Network Keyboard User Manual Figure 7. 33 FTP Server Settings Check the checkbox of Enable FTP. Enter the IP address of the FTP server. 10. Enter the user name and password of login to the FTP server. 11. Enter the file path to which the video files and captured pictures are uploaded.
  • Page 131 DS-1100KI Network Keyboard User Manual You can also set the PTZ movement speed of the connected PTZ camera by using the joystick. Four levels are selectable. Figure 7. 35 Live View and PTZ Speed Settings...

  • Page 132: Chapter 8 Keyboard Configuration Tool

    DS-1100KI Network Keyboard User Manual Chapter 8 Keyboard Configuration Tool Purpose: The configuration tool of the DS-1100KI keyboard is used to facilitate the parameters configuration of the keyboard. 8.1 System Requirements System requirement: 32-bit Windows XP / Windows 7. Running conditions: please place the application program in the same directory where the HCNetSDK.dll, hpr.dll, and Sadp.dll files locate.

  • Page 133: Login By Local Configuration File

    DS-1100KI Network Keyboard User Manual Keyboard.  Local Config File: Use and edit the configuration file of the keyboard which has been exported to PC or local storage device via U-flash disk.  Remote Config File: Operate and edit the configuration file of the keyboard which has been exported to PC or local storage device via network.

  • Page 134: Export/Login By Remote Configuration File

    DS-1100KI Network Keyboard User Manual 8.3.2 Export/Login by Remote Configuration File Steps: Click Remote Config File icon on the Mode Choose interface to enter the Config File interface. Click to select the saving directory for the configure file. Input the IP address and port number of the keyboard.

  • Page 135: Configuring Keyboard By Configuration Tool

    DS-1100KI Network Keyboard User Manual Figure 8. 5 Remote Upgrade Select the Update Mode to Firmware Update. Click to select the update file from the local disk. Input the IP address and port number of the keyboard. Input the user name and password for login to the keyboard.
  • Page 136 DS-1100KI Network Keyboard User Manual Click the Device on the menu bar to enter the Device Management interface: Figure 8. 7 Device Management interface Adding a Device You can add a device by manually or by SADP software. Normal Mode: Click to enter the Add Devices interface.
  • Page 137 DS-1100KI Network Keyboard User Manual SADP Mode: You can use the SADP software to automatically search and add the online devices in the same network. Click to enter the Search online devices interface. The automatically searched devices will be displayed on the list. Select a device from the list and click Add to enter the Add Devices interface.

  • Page 138: Managing User List

    DS-1100KI Network Keyboard User Manual Figure 8. 11 Modifying a Device You are allowed to modify the port, login user name and password. Click Modify to finish the modification. Deleting a Device Select the device(s) from the list and click .
  • Page 139 DS-1100KI Network Keyboard User Manual Adding a User Account Click to enter the Add User interface. Figure 8. 14 Adding a User Account Enter the username and password. Click Add to add the new user account. The successfully added user accounts are listed on the interface: Figure 8.
  • Page 140 DS-1100KI Network Keyboard User Manual Figure 8. 16 Deleting a User Account Click OK to confirm the deletion. Modifying Password Select a user account from the list, and click to enter the Modify Password interface: Figure 8. 17 Modifying Password Enter the new password.
  • Page 141 DS-1100KI Network Keyboard User Manual Figure 8. 18 Adding the Device to User (1) The device (s) successfully added for the current user will be displayed in the list on right. Figure 8. 19 Adding the Device to User (2) When you select multiple devices, the corresponding message box of the result will pop up: Figure 8.

  • Page 142: Managing Channel List

    DS-1100KI Network Keyboard User Manual and click to enter the stream media server settings interface: Figure 8. 21 Stream Media Settings Check the checkbox of Stream Media Start to enable the stream. Enter the Stream Media IP, Stream Media Port and the Stream Media Protocol (TCP/UDP).
  • Page 143 DS-1100KI Network Keyboard User Manual Figure 8. 23 Channel List Interface Select an item from the list, and enter the new index in the Channel Modify field. The new index No. you enter must not exist in the channel list.

  • Page 144: Importing Configuration File

    DS-1100KI Network Keyboard User Manual Deleting Channel(s) Select the channel(s) from the list to be deleted. Click to delete the selected channel(s). Figure 8. 25 Deleting Channel (s) Saving Channel(s) On the Channel List interface, enter the username in the Channel Type field.
  • Page 145 DS-1100KI Network Keyboard User Manual Figure 8. 26 Importing Configuration File Select the directory of the keyboard configuration file. Enter the IP address of the keyboard. Enter the username and password. Click to import the configuration file to the keyboard.

  • Page 146: Chapter 9 Appendix

    DS-1100KI Network Keyboard User Manual Chapter 9 Appendix Specifications Table 9. 1 Specifications Model DS-1100KI Control Mode IP-based 7” TFT LCD monitor with touch panel TFT LCD Panel Resolution: 800 × 480 Joystick 4-axis joystick Line In 1-ch, 3.5 mm connector (2.0 Vp-p, 1 kΩ)

  • Page 147: Upgrade By Ftp

    DS-1100KI Network Keyboard User Manual Upgrade by FTP Enable the FTP service on PC and operate the following steps: Steps: Open the wftp software, and then select Security->Users/rights option. Create new user. Input the user name: target, password: target, and then click OK to continue.

  • Page 148: Version Update

    DS-1100KI Network Keyboard User Manual 9.3 Version Update Version 2.4.0 Updated features: Optimization of dome-control effect. Support scene switch and roaming window via B20 MVC/multi-screen controller/decoder on video wall and device division via segments. Refer to 3.4.1 Adding a Device.
  • Page 149 DS-1100KI Network Keyboard User Manual Version 2.1.0 Updated features: Save the login password on the Login interface for future use. Support the control of analog matrix (via RS-232 serial port) by keyboard. Refer to 6.2 Control of Analog Matrix. Support the control of analog speed dome (via RS-485 serial port).
  • Page 150 DS-1100KI Network Keyboard User Manual...

Table of Contents