Page 2
Quick Start Guide of DS-1100KI Network Keyboard Quick Start Guide About this Guide This Guide is applicable to network keyboard. The Guide includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Guide is subject to change, without notice, due to firmware updates or other reasons.
Page 3
Quick Start Guide of DS-1100KI Network Keyboard Regulatory information FCC information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Page 4
Quick Start Guide of DS-1100KI Network Keyboard Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
Page 5
Quick Start Guide of DS-1100KI Network Keyboard Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: • Ensure unit is placed in a well-ventilated, dust-free environment. • Keep all liquids away from the keyboard.
Page 6
Quick Start Guide of DS-1100KI Network Keyboard Applicable Models This guide is applicable to the model listed in the following table. Series Model Network Keyboard DS-1100KI Symbol Conventions The symbols that may be found in this document are defined as follows.
1.1 Overview DS-1100KI Network Keyboard can be used to control the camera/speed dome, display of decoded video on TV wall, control of matrix, as well as support 1 channel of video view at up to 1080P resolution. Designed with touch screen, it is easy to operate and configure settings.
Page 9
Quick Start Guide of DS-1100KI Network Keyboard Figure 1.2 Interfaces Refer to Table1.2 for the description of the interfaces. Table 1.2 Description of Interfaces Serial No. Description Serial No. Description Touch pen Line In Audio Out Reserved RS-485 Interface RS-232 Interface...
Quick Start Guide of DS-1100KI Network Keyboard Chapter 2 Quick Configuration by Admin Purpose: You can follow the steps below to complete the quick configuration of the keyboard. 2.1 Login Steps: When the keyboard starts up, it enters the following interface.
Quick Start Guide of DS-1100KI Network Keyboard STRONG PASSWORD RECOMMENDED–We highly recommend that you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. We recommend that you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
Quick Start Guide of DS-1100KI Network Keyboard 2.3 Managing the Device Steps: Tap Device on the admin main interface to enter the Device Management interface. Tap Add Device to enter the Device-Add Device interface. Input the device name, device IP/domain name, port, user name and password, and then tap Add to add the device.
Page 13
Quick Start Guide of DS-1100KI Network Keyboard Figure 2.5 User List On the User List interface, tap Add User to enter the Add User interface. Input the user name, password and confirm the password. Tap Add to finish the adding of user.
Page 14
Quick Start Guide of DS-1100KI Network Keyboard Figure 2.8 Add Device The added device (s) for the current user can be displayed on the User-Device interface. You can directly tap the (Login) icon of a user to switch to its operation interface.
Quick Start Guide of DS-1100KI Network Keyboard Chapter 3 Operation Guide by Operator Purpose: As an operator, you can configure the keyboard locally, or by WEB page. This chapter introduces the local keyboard configuration by the operator. You can log in to the operator main interface in two ways.
Quick Start Guide of DS-1100KI Network Keyboard Tap Yes to log in to the operator main interface. Figure 3.3 Operator Main Interface 3.2 Local Live View Purpose: The local live view refers to displaying the video signal from the input channel through the network keyboard.
Quick Start Guide of DS-1100KI Network Keyboard Figure 3.5 Full-Screen Live View Up to 1080P resolution is supported for local live view. You can press the 0+CAM keys to stop the dynamic decoding of the current window. 3.3 Displaying Decoded Video to Output Channel 3.3.1 Setting Multi-Division Display...
Quick Start Guide of DS-1100KI Network Keyboard multi-division number entered is not supported by the current output channel, the message “Window mode error.” will appear. 3.3.2 Displaying Video to Output Channel Purpose: The selected input signal can be output and displayed by the output channel. Currently, the supported decoding resolution includes: QCIF, CIF, 2CIF, DCIF, 4CIF, 720p, 1080p, VGA, UXGA, etc.
Quick Start Guide of DS-1100KI Network Keyboard Corresponding error message will appear on the screen when you perform wrong operation. 3.4 PTZ Control Purpose: If the camera connected to the keyboard supports PTZ function, you are allowed to operate the LIGHT/FOCUS/IRIS/ZOOM/WIPER buttons to realize PTZ control.
Quick Start Guide of DS-1100KI Network Keyboard Tap the USB File tab on the Local Playback interface to enter the Playback by USB File interface. Figure 3.9 Playback by USB File Select the video file from the USB disk for playback.
Quick Start Guide of DS-1100KI Network Keyboard Set the Start Time and End Time of the video files for playback. Tap Search to search the matched video files. The searching results can be viewed on the Playback File List interface.
Page 22
Quick Start Guide of DS-1100KI Network Keyboard Tap Output on the operator main interface to enter the Output Settings interface. Figure 3.14 Output List Select an output channel from the output list and tap the icon to enter the Playback interface.
Page 23
Quick Start Guide of DS-1100KI Network Keyboard The Playback Control buttons on the left side of the control panel are supported during the playback. Playback by Time Steps: Tap the By Time tab to enter the Playback by Time settings interface.
Quick Start Guide of DS-1100KI Network Keyboard Chapter 4 Keyboard Configuration by WEB Server Purpose: You are also allowed to configure the keyboard parameters by WEB server. 4.1 Configuring by Admin Purpose: For the admin, you can view the basic information, configure the keyboard, manage the users and devices, import or export camera list, view the working status of the keyboard, restore default settings, upgrade the keyboard, import or export configuration file, reboot and shutdown the keyboard via the WEB server.
Quick Start Guide of DS-1100KI Network Keyboard Figure 4.2 Main Interface of Admin Click each tab on the left menu bar to operate the corresponding configuration. 4.2 Configuring by Operator Purpose: For the operator, you can configure the devices authorized by the admin, the input and output settings, the auxiliary keys, the password, the network performance, and the FTP server, and reboot or shutdown the keyboard via the WEB server.
Page 26
Quick Start Guide of DS-1100KI Network Keyboard Figure 4.4 Main Interface of Operator Click each tab on the left menu bar to operate the corresponding configuration. 0300001060426...