HIKVISION DS-1100KI User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Keyboard
  5. DS-1100KI
  6. User manual
HIKVISION DS-1100KI User Manual

HIKVISION DS-1100KI User Manual

Network keyboard
Hide thumbs Also See for DS-1100KI:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-1100KI & DS-1105KI Network Keyboard
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-1100KI

Summary of Contents for HIKVISION DS-1100KI

  • Page 1 DS-1100KI & DS-1105KI Network Keyboard User Manual...
  • Page 2 Visit our website (http://www.hikvision.com/) for user manuals, application tools and development materials. Applicable Model This manual is applicable to DS-1100KI and DS-1105KI Network Keyboard. Important Clause Please strictly abide by the applicable laws and regulations for the use and maintenance of monitoring interface.
  • Page 3 DS-1100KI & DS-1105KI Network Keyboard User Manual Operation Convention The following operations may be found in this document are defined as follows. Operation Description ● Press a numeric button and REGION button to select a region. ● Number represents region ID. Go to region menu for the ID.
  • Page 4 DS-1100KI & DS-1105KI Network Keyboard User Manual Operation Description Channel → Camera Group for the ID. ● Press a numeric button and MACRO button to select a macro. ● Number represents macro ID. Go to Keyboard → Macro for the Press Number + MACRO ●...

  • Page 5: Table Of Contents

    DS-1100KI & DS-1105KI Network Keyboard User Manual Contents Chapter 1 Product Introduction ....................1 Chapter 2 Activation........................2 2.1 Local Menu Activation ......................2 2.2 SADP Activation ........................3 2.3 Web Activation ........................3 Chapter 3 Network ........................4 Chapter 4 Keyboard ........................5 4.1 Login ............................
  • Page 6 DS-1100KI & DS-1105KI Network Keyboard User Manual 4.8.1 Remote Panel ......................26 4.8.2 Live View ........................29 4.8.3 PTZ Control ....................... 29 4.8.4 Playback ........................29 4.9 Connect the Device Through Serial Ports ................29 4.9.1 Connect Video Recorders ..................29 4.9.2 Connect Analog Matrix ....................
  • Page 7 DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 7 System ........................45 7.1 Language ..........................45 7.2 Hardware ..........................45 7.3 Storage ..........................46 7.3.1 FTP Storage ....................... 46 7.3.2 USB Storage ......................47 7.4 Upgrade ..........................47 7.4.1 FTP Upgrade ......................47 7.4.2 USB Flash Drive Upgrade ..................

  • Page 8: Chapter 1 Product Introduction

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 1 Product Introduction DS-1100KI and DS-1105KI are network keyboard independently developed by Hikvision. It features in 7-inch full view multi-touch LCD screen and four-dimensional joystick. It supports network access to DVR, DVS, NVR, network camera, network dome, video integrated platform, decoder, iSecure, HikCentral and other platform software, with powerful functions and quick and simple operations.

  • Page 9: Chapter 2 Activation

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 2 Activation You can activate network keyboard via local menu, SADP client or Web interface. 2.1 Local Menu Activation For the first-time access, you need to activate the network keyboard by setting an admin password.

  • Page 10: Sadp Activation

    DS-1100KI & DS-1105KI Network Keyboard User Manual 2.2 SADP Activation SADP software is used for detecting the online device, activating the device, and resetting its password. Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts.

  • Page 11: Chapter 3 Network

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 3 Network Network parameters must be properly configured before you can add network devices and operate the network keyboard over network. Steps 1. Go to System → Network. 2. Configure network parameters.

  • Page 12: Chapter 4 Keyboard

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 4 Keyboard Keyboard mode is mainly applied to small-sized projects. Network keyboard works as a control center and manages security devices in it. 4.1 Login Steps 1. Tap Keyboard at home page.

  • Page 13: Add Devices

    DS-1100KI & DS-1105KI Network Keyboard User Manual 4.2 Add Devices Up to 4000 devices can be added. 4.2.1 Manually Add Steps 1. Go to Keyboard → Device. Figure 4-2 Device Management 2. Tap Center Device or IPC/IP Dome as desired.
  • Page 14 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-3 Add Center Device Figure 4-4 Add Network Camera...

  • Page 15: Add In Batches

    DS-1100KI & DS-1105KI Network Keyboard User Manual 4.2.2 Add in Batches Add Online Devices in Batches You can add the devices with the same user name and password in batches. Steps 1. Go to Keyboard → Device. Figure 4-5 Device Management 2.

  • Page 16: Local Live View

    DS-1100KI & DS-1105KI Network Keyboard User Manual USB flash drive for backup. Before You Start Connect an USB flash drive to the network keyboard. Steps 1. Go to Keyboard → Channel. 2. Export input channel template. 1) Tap to export an excel file.

  • Page 17: Ptz Control

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-7 Local Live View 3. You can do the following operations. 4-Screen Preview ● Press 4 + MULT to switch the current image into 4 screens, and tap any screen to preview the images of different cameras.
  • Page 18 DS-1100KI & DS-1105KI Network Keyboard User Manual preset, patrol and pattern. General Operation Steps 1. Preview speed dome image. Note For detailed steps, see Preview by Operating Touchscreen and Preview by Operating Keyboard Shortcut. 2. Move joystick and press buttons of keyboard to control PTZ.
  • Page 19 DS-1100KI & DS-1105KI Network Keyboard User Manual By Operating Keyboard Shortcut 1. Preview speed dome image. For detailed steps, see Preview by Operating Touchscreen and Preview by Operating Keyboard Shortcut. 2. Rotate the joystick to move PTZ to a desired position.
  • Page 20 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-8 Edit Patrol 4. Press Num + ENTER to select preset. 5. Press Num + ENTER to set duration. 6. Press Num + ENTER to set speed. Note If you press Num + PATROL during steps 4 to 6, the settings will be cleared.

  • Page 21: Video Wall

    DS-1100KI & DS-1105KI Network Keyboard User Manual 2. Set a pattern. 1) Tap 2) Tap Pattern. 3) Tap of a desired pattern. 4) Tap OK. 5) Rotate the joystick to control PTZ. The movement will be recorded. 6) Tap to save the pattern.
  • Page 22 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-10 Add Region 3. Enter video wall ID, start coordinate, and end coordinate. 4. Tap OK. Note ● Up to 16 regions can be added. ● Region size cannot be larger than 6 × 8 (row × column).

  • Page 23: Video Wall Control

    DS-1100KI & DS-1105KI Network Keyboard User Manual 4. Tap OK to finish setting. Note Region output channel layout should be the same with the actual video wall. Figure 4-12 Add Output 4.4.2 Video Wall Control Layout Operation Select a monitor to open, close, resize, and divide windows.
  • Page 24 DS-1100KI & DS-1105KI Network Keyboard User Manual Close window Long press a window, and tap to close the window. Resize window ● Double tap a window to expand it to cover all the grids it overlays. Double tap the window again to restore it to the previous size.
  • Page 25 DS-1100KI & DS-1105KI Network Keyboard User Manual Capture Images Press the button on the top of joystick to capture a picture. Clip Videos Press to start clipping and press it again to stop clipping. Scene Operation You can switch the scene for a region or video wall.

  • Page 26: Ptz Control

    DS-1100KI & DS-1105KI Network Keyboard User Manual Icon Description Note You can also press SET + Num + SCENE + SET to save scene. ● Press Num + SCENE to switch scenes. 4.4.3 PTZ Control You can control the added speed dome, like control PTZ movement, turn on/off light, turn on/off wiper, zoom in/out, increase/decrease focus, increase/decrease iris, set/call preset, patrol and pattern.

  • Page 27: Playback

    USB flash drive or FTP server. For steps of storage configuration, see Storage. Note DS-1100KI supports speed control via both outer shuttle and the joystick. DS-1105KI supports speed control via the joystick only. Table 4-3 Button Description...

  • Page 28: Video Wall Playback

    DS-1100KI & DS-1105KI Network Keyboard User Manual Button Description Button Description Jump backward for 30 Stop playback. seconds. During playback, press it to start clipping. Press it again to Jump forward for 30 seconds. stop clipping. ● Rotate it clockwise for 2/4/8 times faster.

  • Page 29: Channel Management

    DS-1100KI & DS-1105KI Network Keyboard User Manual Note Capturing, clipping, recording, jumping forward or backward for 30 seconds are not supported in Video Wall Playback. 4.6 Channel Management 4.6.1 Edit Channel We take editing input channel as the example to describe the steps.

  • Page 30: Output Channel

    DS-1100KI & DS-1105KI Network Keyboard User Manual 4.6.2 Output Channel When adding decoders or video recorders, their output channels will be added and displayed in output channel list. You can press Num + MON to operate an output channel, and the number refers to output channel ID.
  • Page 31 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-17 Add Camera Group 3. Enter group name and interval. Interval: The time to dwell in each input channel before switching to next channel. 4. Tap OK. 5. Add input channel to camera group.

  • Page 32: User Management

    DS-1100KI & DS-1105KI Network Keyboard User Manual edit their own camera groups. 6. Optional: Tap Linked Channel, check input channels to be unlinked and tap to unlink the input channel. 4.7 User Management Administrator can add operator and allocate devices to operator. Operator permissions are as follows: ●...

  • Page 33: Video Recorder

    DS-1100KI & DS-1105KI Network Keyboard User Manual Note ● Keyboard supports up to 32 users: 1 administrator and 31 operators. ● The operator can only operate on the devices allocated. 5. Optional: Tap Linked Device, check the devices to be unlinked and tap to unlink the devices.
  • Page 34 DS-1100KI & DS-1105KI Network Keyboard User Manual Button Description Start/stop manual recording. ● In live view mode, tap it to enter Instant Playback interface. PLAY ● During playback, tap it to select a day in the calendar. In editing mode, tap it to switch input method among digits, letters, and characters.
  • Page 35 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-21 Remote Panel (Enable PTZ) Table 4-5 Button Description Button Description Enable PTZ In PTZ live view mode, enable PTZ to enter PTZ control mode. Numeric Button Switch to the corresponding channel.

  • Page 36: Live View

    DS-1100KI & DS-1105KI Network Keyboard User Manual 4.8.2 Live View Video Recorder (Version before 4.0) Whatever interface the video recorder is in, tap ESC till you enter the live view mode. Video Recorder (Version: 4.0 and above) Whatever interface the video recorder is in, tap directional button to enter the live view mode.
  • Page 37 DS-1100KI & DS-1105KI Network Keyboard User Manual Note T+ and T- of RS-485 interface correspond to D+ and D- of KB port respectively. 2. Enter Serial Port Control, and select DVR/NVR. 3. Select Device Address. 4. Select Device Version. Note ●...

  • Page 38: Connect Analog Matrix

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-23 Connect Video Recorder (PTZ Enabled) 4.9.2 Connect Analog Matrix The keyboard can be connected to the analog matrix through RS-232 serial port. Steps 1. Connect the analog matrix to the RS-232 interface on the keyboard.

  • Page 39: Connect Analog Dome

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-24 Setting Parameters of RS232 Serial Port 5. Optional: Switch one input port of the analog matrix to the output port. 1) Part of the analog matrix needs to enter the device number in the keyboard.
  • Page 40 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-25 Select Serial Port 3. Tap on the upper-right corner. ● Set the parameters of RS-485 serial port. Figure 4-26 Setting Parameters of RS-485 Serial Port ● Set the parameters of RS-232 serial port.
  • Page 41 DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 4-27 Setting Parameters of RS-232 Serial Port Note Among all RS-232 protocols, only Visca supports the control of analog domes. 4. Press NUM+CAM and select analog dome. Note One RS-485 serial port can be connected to multiple analog domes. The longer the serial port cable is, the fewer analog domes can be connected at the same time.

  • Page 42: Chapter 5 Isecure Mode

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 5 iSecure Mode 5.1 Login Steps 1. Tap iSecure at home page. Figure 5-1 Log in to iSecure 2. Tap Server IP on the upper right corner. Figure 5-2 Server IP Configuration 3.

  • Page 43: Resource List

    DS-1100KI & DS-1105KI Network Keyboard User Manual keyboard. ● Different users have different kinds of permissions. Please refer to the messages on the interface. 5.2 Resource List Resource list interface appears after you log in to iSecure. Resource list contains control center, region, video wall, and camera.

  • Page 44: Local Live View

    DS-1100KI & DS-1105KI Network Keyboard User Manual 5.3 Local Live View You can preview the cameras on iSecure platform on the touchscreen. 5.3.1 Enable Local Live View Preview the images of cameras by operating keyboard shortcut. Steps 1. Press 0 + MON to enter local live view.

  • Page 45: Video Wall Control

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 5-4 Add Region 3. Enter video wall ID, start and end coordinates. 4. Tap OK. Note ● Up to 16 regions are supported. ● The maximum region specification is 6 × 8.

  • Page 46: Video Wall Playback

    DS-1100KI & DS-1105KI Network Keyboard User Manual 5.5 Video Wall Playback On the keyboard video wall, you can play back video files from cameras on iSecure platform. Note ● You can play back video files from the central or local cameras by choosing Central Storage or Local Storage after tapping .

  • Page 47: Chapter 6 Hikcentral Mode

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 6 HikCentral Mode The keyboard is accessible to HikCentral platform, and the images of the cameras accessible to HikCentral platform can be displayed on the video wall and previewed locally. 6.1 Login Steps 1.

  • Page 48: Resource List

    DS-1100KI & DS-1105KI Network Keyboard User Manual 6.2 Resource List Resource list interface appears after you log into HikCentral platform. Resource list contains control center, region, video wall, and camera. Tap a control center or region, and you can view its subordinate control center, region, and camera.

  • Page 49: Ptz Operation

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 6-4 Local Live View 3. During preview, use the joystick to control the pattern of PTZ. 4. During preview, switch channels, capture images, or clip videos. 4-Window Preview ● Press 4 + MULT to switch the current image into 4 windows, and tap any window to preview more cameras.

  • Page 50: Video Wall Operation

    DS-1100KI & DS-1105KI Network Keyboard User Manual 6.4 Video Wall Operation 6.4.1 Region Configuration The whole video wall can be divided into different regions for management. Steps 1. Tap on the upper-right corner. 2. Tap Figure 6-5 Add Region 3. Enter video wall ID, start and end coordinates.

  • Page 51: Ptz Operation

    DS-1100KI & DS-1105KI Network Keyboard User Manual such as opening a window, closing a window, resizing a window, and dividing a window. ● For LED video walls, you can open a window or batch open windows by tapping icons on the upper right corner.

  • Page 52: Chapter 7 System

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 7 System Tap System at home page to enter system interface. You can configure keyboard network, hardware, time, etc. Note Restoring default settings, importing/exporting configuration files, and remote upgrades require the administrator password to be verified.

  • Page 53: Storage

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 7-2 Hardware Parameters (DS-1105KI) Transparency Select menu transparency. Available only in local live view. Performance You can select minimum delay, medium (default) or default according to the actual network. Alarm Keyboard alarms when network disconnected or IP conflicted.

  • Page 54: Usb Storage

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 7-3 FTP Storage 2. Configure FTP server information. ● IP Address: IP address of FTP server. ● Folder: The folder name to be created in FTP server. ● User Name and Password: User name and password of FTP server.

  • Page 55: Usb Flash Drive Upgrade

    DS-1100KI & DS-1105KI Network Keyboard User Manual 2. Turn on FTP server and input upgrade file into FTP root folder. 3. Go to System → Maintenance and select FTP upgrade. 4. Enter admin password to confirm. 7.4.2 USB Flash Drive Upgrade Steps 1.

  • Page 56: Auxiliary Key

    DS-1100KI & DS-1105KI Network Keyboard User Manual 7.7 Auxiliary Key You can set F1 or F2 as Two-way Audio or Enlarge/Restore Sub-Window. If users at the keyboard side want to have an audio call with users at the device side, set an auxiliary key as two-way audio to enable audio call.

  • Page 57: Chapter 8 Web Configuration

    DS-1100KI & DS-1105KI Network Keyboard User Manual Chapter 8 Web Configuration You can add devices, manage channels or configure basic parameters through the web interface of the network keyboard. It is convenient to remotely configure and maintain the network keyboard.
  • Page 58 DS-1100KI & DS-1105KI Network Keyboard User Manual 2. Click Add, select to add devices by IP address or IP segment, and enter IP Address, Port, User Name and Password, and select protocol type. Figure 8-2 Add Device by IP Address...
  • Page 59 DS-1100KI & DS-1105KI Network Keyboard User Manual Note ● It takes a long time to add devices by IP segment. Please wait patiently. ● After adding devices in IP segment mode, you need to refresh manually to get the added devices.

  • Page 60: Import Input Channels In Batches

    DS-1100KI & DS-1105KI Network Keyboard User Manual 8.2.2 Import Input Channels in Batches Before You Start 1. Add several devices manually. Go to Channel Management → Input Channel, click Export, enter password, and then export channel information. 2. Edit the device channel information based on the exported template, and save the exported channel information into the local PC.

  • Page 61: Camera Group

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 8-6 Edit Input Channel 3. Edit channel parameters. Input Channel ID Each input channel corresponds to a unique number, which is valid for video wall and local live view. Stream Type Code stream for local live view and video wall preview.

  • Page 62: Serial Port Settings

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 8-7 Add Camera Group 3. Enter Name and Interval(s). 4. Check input channels to be linked and click OK. Note ● Up to 16 camera groups can be added. ● Each camera group can link up to 64 input channels.

  • Page 63: Network

    DS-1100KI & DS-1105KI Network Keyboard User Manual edit the address of RS485 serial port, and copy RS485 serial port settings to all. ● Configure the parameters of RS-485 port when the serial port is connected to analog dome. ● Configure the parameters of RS-232 port when the serial port is connected to the analog matrix.

  • Page 64: System Settings

    DS-1100KI & DS-1105KI Network Keyboard User Manual Figure 8-10 Network Parameters 8.6 System Settings 8.6.1 Version Go to System Management → Version to view system version information, including device type, serial No., firmware version, decoding version, MCU version and web version.
  • Page 65 DS-1100KI & DS-1105KI Network Keyboard User Manual ● Add, edit, and delete macro and group. ● Add, edit, and delete region. ● Deleting, editing, and adding devices are not allowed. Steps 1. Go to System Management → User Management. 2. Click Add.

  • Page 66: System Maintenance

    DS-1100KI & DS-1105KI Network Keyboard User Manual 3. Enter user name and password for an operator, and click OK. Caution We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.

  • Page 67: Log Management

    DS-1100KI & DS-1105KI Network Keyboard User Manual ● The configuration file encrypted and exported is named as configurationdata. ● If the configuration file is encrypted, you need to enter the key of the configuration file when importing it. Remote Upgrade Click Browse to select the upgrade file in the computer, and click Upgrade to upgrade the network keyboard remotely.

  • Page 68: Security Settings

    DS-1100KI & DS-1105KI Network Keyboard User Manual 8.6.5 Security Settings Go to System Management → Security Settings, and enable or disable SSH and SADP. ● SSH is disabled by default after the network keyboard is restarted. ● When you enable SADP, the keyboard can be searched. When you disable SADP, the keyboard...
  • Page 69 UD34066B...

This manual is also suitable for:

Ds-1105kiDs-1100kib

Table of Contents