Cisco ONS 15200 Series Installation, Setup & User Manual page 6

Contents
Connectors and Cabling
5
C H A P T E R
Acronyms
A
A P P E N D I X
Acceptance Test Plan
B
A P P E N D I X
I N D E X
Cisco ONS 15200 Installation, Setup, and Test Manual
vi
4.2 ONS 15200 Network Configuration
Procedure: Configure the Network
4.3 ONS 15252 MCU Turn Up and Test
Procedure: Initialize the ONS 15252 MCU
Procedure: Check DWDM Receivers and Client Transmit Levels
Procedure: Check Alarms
Procedure: Check Optical Protection
Procedure: Test the Bit Error Rate
4.4 ONS 15201 SCU Turn Up and Test
Procedure: Initialize the ONS 15201 SCU
Procedure: Check DWDM Receivers and Client Transmit Levels
Procedure: Check Optical Protection
Procedure: Test the Bit Error Rate (Single SCU)
Procedure: Test the Bit Error Rate (Multiple SCUs at a Site)
4.5 Perform System Span Testing for a Hub Configuration
Procedure: Connect a Path
Procedure: Test the Bit Error Rate for Unprotected Channels
Procedure: Test the Bit Error Rate for Protected Channels
5-1
5.1 Electrical Connectors
5.1.1 ONS 15252 MCU Electrical Connectors
5.1.2 ONS 15201 SCU Electrical Connectors
5.2 Optical Fiber Jumper Cable Connectors
5.2.1 ONS 15252 MCU Optical Connectors
5.2.2 ONS 15201 SCU Optical Connectors
A-1
B-1
B.1 ONS 15200 Network Configuration
B.2 ONS 15252 Multichannel Unit Turn Up and Test
B.3 ONS 15201 Single-Channel Unit Turn Up and Test
B.4 ONS 15200 System Span Test
4-2
4-2
4-6
4-6
4-10
4-12
4-12
4-13
4-13
4-16
4-19
5-1
5-1
5-2
5-3
5-3
5-4
B-2
B-2
B-8
4-8
4-15
4-17
4-17
4-19
4-20
4-21
B-7
78-13765-01