Start/Pause And Add Clothes Touchpad; Before First Use - AEG AWW12746 User Manual

3.7 Start/Pause
Add Clothes
This touchpad has 2 functions:
● Start/Pause
After you have selected the desired
program and options, press this
touchpad to start the machine. The
"Start/Pause" pilot light will stop
flashing and remain lit until the water
level is above the bottom edge of the
door then pilot light goes OFF. If you
have selected a "Delay Start" option,
the countdown will begin and will be
shown in the display.
To interrupt a program which is
running, press this touchpad to pause
the machine, the "Start/Pause" pilot
light flashes.
To restart the program from the point
at which it was interrupted, press this
touchpad again, the "Start/Pause" pilot
light will stop flashing.
4.

BEFORE FIRST USE

During installation or before first use you may observe some water in the machine. This
is a residual water left in the machine after a full functional test in the factory to ensure
the machine is delivered to customers in perfect working order and is no cause for
concern.
Ensure that the electrical and water connections comply with the installation
1.
instructions.
Place a very small amount of laundry detergent in the machine without laundry, set
2.
the Tub Clean course and run. Any dirt remaining from the manufacturing process
will be removed in this way.
and
● Add Clothes
Touchpad
You can only add clothes if
"Start/Pause
While running a program, you may add
clothes by:
-
Pressing the "Start/Pause
touchpad to pause the program.
-
Wait for the machine to come to a
complete stop before opening the
door.
-
Add clothing and close the door.
-
Resume the program by pressing
"Start/Pause " touchpad again.
You cannot open the door if
the water inside the machine
drum are hot, the door remains
locked for your safety.
Although the LED light still
remain lit.
65
" pilot light is lit.
"