Cellular Antenna Extension Bases; Accessories - Cisco IR1101 Hardware Installation Manual

Antenna Selection and Installation

Cellular Antenna Extension Bases

The following table provide information for the Extension Bases supported by the IR1101.
Table 17: Extension Bases
Extension Base PID Description
4G-AE010-R TNC(m)-STR to TNC(f)-STRLMR-195, 10 foot RF
cable Type: PlenumAntenna extension bases
4G-AE015-R TNC(m)-STR to TNC(f)-STRLMR-195, 15 foot RF
cable Type: Plenum Antenna extension bases
LTE-AE-MAG-SMA TNC(f)-STR to SMA(f)-STR LMR-195, 1ft RF
cableType: Plenum Antenna extension bases

Accessories

The following table provides information for other accessories supported by the IR1101:
•
•
Table 18: Cisco Lightning Arrestors
Cisco PID Connectors Type
CGR-LA-NM-NF N(m)-STR to N(f)-STR
ACC-LA-H-NM-NF N(m)-STR to N(f)-STR
CGR-LA-NF-NF N(f)-STR to N(f)-STR
ACC-LA-G-TM-TF TNC(f)-STR to TNC(m)-STR
ACC-LA-G-TF-TF TNC(f)-STR to TNC(f)-STR
Table 19: Cisco Coaxial Adapters
Cisco PID Connectors Type
AIR-ACC370-NF-NF N(f)-STR to N(f)-STR
LTE-ADPT-SM-TF SMA(m)-STR to TNC(f)-STR
Table 18: Cisco Lightning Arrestors, on page 49
Table 19: Cisco Coaxial Adapters, on page 49
Arrestor Type and Frequency Range (MHz)
DC to 6000 MHz GDT typeSupports active GNSS antennas, passes DC
698 to 2700 MHzHigh power, ultra low shunt impedance, HPF typeDoes not
pass DC, no support for active GNSS antennas
DC to 6000 MHzGDT typeSupports active GNSS antennas, passes DC
DC to 6000 MHzGDT typeSupports active GNSS antennas, passes DC
DC to 6000 MHzGDT typeSupports active GNSS antennas, passes DC
IR1101 Industrial Integrated Services Router Hardware Installation Guide
Cellular Antenna Extension Bases
RF Loss
1.1 dB @ 0.7 GHz 1.4 dB @ 1.0 GHz 1.8 dB @ 1.7
GHz 2.1 dB @ 2.4 GHz2.3 dB @ 2.7 GHz
1.7 dB @ 0.7 GHz 2.0 dB @ 1.0 GHz 2.6 dB @ 1.7
GHz 3.2 dB @ 2.4 GHz3.4 dB @ 2.7 GHz
0.2 dB @ 0.7 GHz0.2 dB @ 1.0 GHz0.3 dB @ 1.7
GHz0.3 dB @ 2.4 GHz0.3 dB @ 2.7 GHz
49