Honeywell NOTIFIER UDACT-2 Instruction Manual page 12

Overview
Switch # Switch Name
3 TEST REPORT
4 RESET
12
Press and hold this button switch down for over 3 seconds to have the UDACT-2 transmit a test message to both
Central Stations. The message reported is the same as the automatic test message for all formats except
Ademco Contact ID.
Press this button switch down for a hardware reset.
Table 1.4 Switches (2 of 2)
Description
UDACT-2 — Instruction Manual P/N 54089:B3 10/29/2019
Board Layout