Honeywell MT13-520 Manual page 44

-1 5 //
replace K2LCN*
-1 6 //
replace K2LCN*
-1 7 n
n=(0), (1) check for duplicate node number; check/replace TPLCN cable; replace
K2LCN
n=(2 thru 5) replace K2LCN board; replace K2LCN in other nodes
n=(6) replace Winchester (drive or interface)
n=(7 thru 9) reload node, replace K2LCN
n=(other) replace K2LCN*
-1 8 n
n=(0 thru 2) replace EPDG board
n=(3) reload node, replace K2LCN
n=(4,5,8) check for proper release version of the software; reboot system
n=(9) check/replace TPLCN cable; check for proper release version of the
software; reboot system
n=(A,C,E,F) suspect the load image; check the software release version and reload the
node
n=(other) replace K2LCN*
Multinode Module Service A-6
A
9/95